User guide

Landscape/Portrait Modes
The LCD display can operate in either Landscape or Portrait mode.
Follow the instructions that accompany the Perfect Portrait software.
To switch from Landscape (default) to Portrait mode, do the following:
1
From the front, gently raise the LCD display to allow more clearance.
2 Pull the bottom of the LCD display outward and away from the base.
3
Manually rotate the LCD display clockwise 90 degrees as shown above.
To Raise and Lower the display
You can easily raise and lower the display panel (the head) manually. As you
face the front of the display, take hold of each side of the head and pull up or
down. The panel should move easily.
Note: Before using the portrait
display mode, first install the Perfect
Portrait
TM
software included with
your LCD display.
Perfect Portrait software is
compatible with most PCI and AGP
graphics (video) cards.
For information about compatible
graphics cards and approved
hardware configurations, go to the
ViewSonic website, http://
www.viewsonic.com
Landscape
Portrait
ViewSonic VP912b/VP912s 5