ViewSonic ® VNB132 NetBook - User Guide - 使用手冊 (簡中) Model No.
Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC Radiation Exposure Statement This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This wireless module device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada Notice This wireless module device complies with Canadian RSS-210.
Important Safety Instructions 1. DO NOT press or touch the LCD Screen. DO NOT place notebook PC with small items, they may scratch LCD Screen or penetrate the vents of notebook PC. 2. DO NOT expose notebook PC to dirty or dusty environment. Keep the environment clean and dry. 3. DO NOT place notebook PC on uneven or unstable work surface. 4. DO NOT place or drop objects on the top of notebook PC. DO NOT shove any foreign objects into notebook PC. DO NOT close with force the LCD Screen lid. 5.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/ EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0,1% < 0,1% Mercury
Copyright Information Copyright © ViewSonic® Corporation, 2010. All rights reserved. Microsoft®, Windows®, Windows NT®, and the Windows® logo are registered trademarks of Microsoft® Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView®, ViewMatch™, and ViewMeter® are registered trademarks of ViewSonic® Corporation. Intel®, Pentium®, and Atom™ are registered trademarks of Intel Corporation.
Contents SPECIFICATIONS............................................................................................................................................. 1 CHAPTER 1 INTRODUCING YOUR NOTEBOOK........................................................................................... 4 1.1 FRONT SIDE ............................................................................................................................................. 5 1.1.1 Camera ............................................
Specifications CPU • • • • Ultra Low Voltage(ULV) Intel Celeron Processor Single Core, 1.2/1.3GHz, FSB 800MHz On die, up to 1MB L2 cache * Ultra Low Voltage(ULV) Intel ® Pentium® Processor • • • Single Core, 1.3GHz, FSB 800MHz, On die, up to 2MB L2 cache. * (ULV) Intel® Core™2 Duo Mobile Processor, Core™2 Solo Mobile Processor, • • • Single Core, 1.2GHz/ 1.
Keyboard • • • • 86/87 keys support with 100/101 key emulation without stick-point Windows key, Application key 285mm, 5.0mm height, 19.05mm pitch, 2.4mm travel length. Multi-Langue support. Hard Disk Drive (HDD) • 9.5mm, 2.
3G Module • 3G module via USB2.0 interface (option) Bluetooth • Bluetooth v2.1 with USB2.0 interface (option) Mini Card Organization • Two Mini card slots.
Chapter 1 Introducing Your Notebook ViewSonic VNB132 4
1.1 Front Side The following picture shows the front side of your notebook. 1 Camera 8 WOW Audio 2 Microphone 9 Power Button 3 Caps Lock(Blue) 10 Power(Blue) 4 Num Lock(Blue) 11 Battery(Blue/Amber) 5 Wireless Button 12 HDD(Blue) 6 Program DJ 13 Wireless Status 7 WOW Video 1.1.
The built-in camera supports a 1.3 or 2.0 mega pixels CMOS via USB2.0 interface. 1.1.2 Caps Lock (Blue) Caps lock LED (Blue): Caps Lock State of Keyboard NOTE: In normal mode (Cursor and Num function are disable), when users press Hot Key, the Cursor LED will be on. When users press Hot Key, the Cursor LED will be off. 1.1.3 Num Lock LED (Blue) Number Lock LED (Blue): Number Lock State of Keyboard. 1.1.4 Wireless Button It will enable/disable Wireless function. 1.1.
Reflect the activities of Blue LED. Note: LED is controlled directly by hardware. 1.1.
1.2 Right Side 1 HDMI 2 e-SATA 3 USB 2.0 4 CRT，15-pin 5 RJ-45 6 Kensington Lock 1.2.1 HDMI Port The High-Definition Multimedia Interface (HDMI) is a compact audio/video connector interface for transmitting uncompressed digital streams. It represents a digital alternative to consumer analog standards such as Radio Frequency (RF) coaxial cable, composite video, S-Video, SCART, component video, D-Terminal, and VGA 1.2.2 USB 2.
The RJ-45 network jack allows you to connect your notebook to a local area network (LAN). Be careful not to plug the telephone line into the slightly larger network connector. 1.2.4 Kensington Lock A Kensington Security Slot is a small, metal-reinforced hole found on almost all small or portable computer and electronics equipment, particularly on expensive and/or relatively light ones, such as laptops, computer monitors, desktop computers, gaming consoles, and video projectors.
1.3 Left Side 1 DC-in 2 USB 2.0 3 Microphone 4 Headphone 5 Media Card 1.3.1 DC-in Use this connector to attach the AC adapter to your notebook. You can connect an AC adapter when your notebook is switched on or off. While the AC adapter works with electrical outlets worldwide, power connectors and power strips vary by country. Ensure you use a compatible cable or correctly connect the cable to the power strip or electrical outlet. Failure to do so may cause fire or damage to equipment.
1.3.2 USB 2.0 USB is a peripheral expansion standard that supports data-transfer rates up to 480 Mbps. USB peripherals has a single standard for cables and connectors. You can install and remove USB devices while the computer is on. This is called “hot swapping”. 1.3.3 Media Card Support one SD/MMC/MS card, which is used in digital still camera and various forms of portable information equipment.
1.4 Bottom Side The following picture shows the bottom side of your notebook 1 Battery Latch 2 Battery Knob 3 RAM Door 4 HDD Door 1.4.1 To remove the Battery Pack: Move the Battery Lock Switch to the right (Unlock position). Slide the Battery Release Latch to the left and gently pry the Battery Pack from the computer chassis. 1.4.2 Battery Release Latch The Battery Release Latch secures the battery pack. To release, slide the latch and then remove the battery pack from the bay.
1.4.
Chapter 2 The BIOS Setup Program ViewSonic VNB132 14
2.1 Introduction The BIOS (Basic Input and Output System) Setup program is a menu driven utility that enables you to make changes to the system configuration and tailor the operation of your notebook to your individual work needs. A ROM-based configuration utility displays the system’s configuration status and provides you with a tool to set system parameters. These parameters are stored in nonvolatile battery backed-up CMOS RAM, which saves this information even when the power is turned off.
2.2 Navigating through the BIOS Setup Program ¾ Accessing the BIOS Setup Program ¾ Launching Submenus ¾ Saving Changes and Exiting the Setup Program The Setup program has been designed to make it as easy to use as possible. It is a menu driven program, which means you can scroll through the various directories and make your selections among the various predetermined choices. If you accidentally configure a setting, use the BIOS hot keys to return to the previous value.
2.2.1 Accessing the BIOS Setup Program To access the BIOS Setup program, press the [F2] key as soon as your notebook starts up. The Phoenix BIOS screen will display. Phoenix SecureCore(tm) Setup Utility Main Security Boot Exit Item specific Help System Time: [XX:XX:XX] System Date: [XX/XX/XXXX] , , or selects fields. Product Name: N/A Serial Number: N/A System Memory: XXX KB Extended Memory: XXXX MB BIOS Version: X.
Item Specific Help To the right of the Setup screen, you will notice an item specific help bar. For each item that you select on the menu, the bar informs of its specific function as well as the hot keys related to that item and/or submenu. 2.2.2 Launching Submenus A submenu contains the additional options for a field parameter. To call up a submenu, simply move the highlight to the desired field and press the [Enter] key. The submenu opens.
2.3 The Main Menu When the Setup program is accessed, the Information screen appears. It displays the following pieces of information regarding your current system: Phoenix SecureCore(tm) Setup Utility Main Security Boot Exit Item specific Help System Time: [XX:XX:XX] , , or System Date: [XX/XX/XXXX] selects fields.
This field reports the memory size of system base memory. The size is fixed to 640KB. Extended Memory This field reports the memory size of the extended memory with an integer in the system, but 32Bit SMI will occupy 1 MB and UMA frame buffer (Integrated VGA uses only). Extended Memory size = Total memory size – 1 MB – 1 MB – UMA frame buffer BIOS Version This field displays current version of the BIOS. UUID This field displays the platform UUID number.
2.
If there is an old password then setup will prompt with the following window instead and a current password will be required to be entered at first: Set Supervisor Password Enter current password [ ] Enter New Password [ ] Confirm New Password [ ] User can type password in field of enter new password”, and re-enter password in field of “confirm new password “for verification. If verification OK: Setup Notice Changes have been saved.
2.5 The Boot Menu This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices include the diskette drive in module bay, the onboard hard disk drive and the CD-ROM in module bay. Phoenix SecureCore(tm) Setup Utility Main Security Boot Exit Item specific Help Boot priority order: 1: IDE 0: 2. IDE 4: 3: USB FDC: 4: USB HDD: 5.
2.6 The Exit Menu Phoenix SecureCore(tm) Setup Utility Main Security Boot Exit Item specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Saves Changes F1 Help Esc Exit ↑↓ Select Item ←→ Select Menu -/+ Change Values Enter Select 4Sub-Menu F9 Setup Defaults F10 Save and Exit Exit Setup Menu Exit setup menu.
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = Telephone F = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 F= 1-909-468-1202 service.ca@viewsonic.com Europe www.viewsoniceurope.
Limited Warranty VIEWSONIC® NETBOOK What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
