User's Manual
Table Of Contents
- Model No. VS14032
- ViewPhone 3
- User Guide
- The following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or a...
- Changes or modifications not expressly approved by the party responsible for compliance could void theuser’s authority to operat...
- THIS MOBILE DEVICE MEETS THE GOVERNMENT’S REQUIREMENT FOR EXPOSURE TO RADIO WAVES.
- This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
- The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. Th...
- Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be we...
- The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 0.664 W/kg and when worn on t...
- While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements.
- The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with...
- For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that cont...
- THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is d...
- The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR li...
- The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC, R&TTE Directive 1999/5/EC.
- The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
- The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
- If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it...
- The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0-300 GHz).
- This equipment meets the following conformance standards: EN62209-1/2, EN60950-1, IEC60950-1, EN50332-1/2, EN301489-1, EN301489-3, EN301489-7, EN301489-17, EN301489-24, EN301511, EN301908-1/2, EN300328, EN300440-1/2, EN55022, EN55024.
- For the device which is tested in accordance to EN60950-1:2006, it is mandatory to
- perform audio tests for EN50332. The device has been tested to comply with the Sound Pressure Level requirement laid down in the...
- A pleine puissance, l’écoute prolongée du baladeur peut endommager l’oreille de l’utilisateur.
- The conformity assessment procedure has been followed with the involvement of the following Notified Body:
- PHOENIX TESTLAB
- Identification mark: CE0700 (Notified Body) CE
- We, hereby, declare that this cellular, Wi-Fi, & Bluetooth radio is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
- For 2.4-GHz wireless LAN operation of this product, certain restrictions apply. This equipment may use the entire-2400-MHz to 24...
- This company hereby guarantees that all large-screen smartphones sold (or manufactured) by it (including their LP RF electric de...
- Important Safety Instructions
- 1. DO NOT place objects on top of the device, as objects may scratch the screen.
- 2. DO NOT expose the device to dirty or dusty environments.
- 3. DO NOT place the device on an uneven or unstable surface.
- 4. DO NOT insert any foreign objects into the device.
- 5. DO NOT expose the device to strong magnetic or electrical field.
- 6. DO NOT expose the device to direct sunlight as it can damage the LCD Screen. Keep it away from heat sources.
- 7. Do not store your device in temperatures higher than 47˚C (116˚F). The operating temperature for this device is from 0˚C (32˚F) to 47˚C (117˚F).
- 8. DO NOT use the device in the rain.
- 9. Please check with your Local Authority or retailer for proper disposal of electronic products.
- 10. The device and the adapter may produce some heat during normal operation or charging. DO NOT leave the device on your lap to prevent discomfort or injury from heat exposure.
- 11. POWER INPUT RATING: Refer to the rating label on the device and be sure that the power adapter complies with the rating. Only use accessories specified by the manufacturer.
- 12. DO NOT use a pen or any sharp object to tap the screen.
- 13. Clean the touch screen with a soft cloth. If needed, dampen the cloth slightly before cleaning. Never use abrasives or cleaning solutions.
- 14. Always power off the device to install or remove external devices that do not support hot-plug.
- 15. Disconnect the device from an electrical outlet and power off before cleaning the device.
- 16. DO NOT disassemble the device, only a certified service technician should perform repair.
- 17. The device has apertures to disperse heat. DO NOT block the device ventilation, the device may become hot and malfunction as a result.
- 18. Risk of explosion if battery replaced aced by an incorrect type. Dispose of used batteries according to the instructions.
- 19. Users have to use the connection to USB interfaces with USB 2.0 version or higher.
- 20. PLUGGABLE EQUIPMENT, the socket-outlet shell be installed near the equipment and shall be easily accessible.
- Declaration of RoHS Compliance
- Important Safety Instructions
- This product has been designed and manufactured in compliance with Directive 2002/ 95/EC of the European Parliament and the Coun...
- Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below:
- Examples of exempted components are:
- 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive.
- 2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices).
- 3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
- 4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
- Copyright Information
- Copyright © ViewSonic® Corporation, 2012. All rights reserved.
- Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions.
- This product has an Android™ platform based on Linux, which can be expanded by a variety of JME-based application SW.
- All products used in this device and trademarks mentioned herein are trademarks or registered trademarks of their respective owners.
- Google™, the Google logo, Android™, the Android logo and Gmail™ are trademarks of Google Inc. Use of this trademark is subject to Google Permissions.
- Wi-Fi and the Wi-Fi CERTIFIED logo are registered trademarks of the Wireless Fidelity Alliance.
- microSD™ is a trademark of SD Card Association.
- Bluetooth and the Bluetooth logo are trademarks owned by Bluetooth SIG, Inc.
- Java, JME and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries.
- The prediction engine of the input method is TOUCHPAL, provided by COOTEK.
- DataViz and RoadSync are registered trademarks of DataViz, Inc. All rights reserved.
- DataViz and Documents To Go are trademarks or registered trademarks of DataViz, Inc. All rights reserved.
- Word To Go™, Sheet To Go®, Slideshow To Go®, PDF To Go® and icons are trademarks or registered trademarks of DataViz, Inc. All rights reserved.
- Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
- In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.
- No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.
- Right to all technologies and products that comprise this device are the property of their respective owners:
- This product has an Android platform based on Linux, which can be expanded by a variety of Java-Script-based application SW.
- Google, the Google logo, Android, the Android logo, Gmail, and YouTube are trademarks of Google Inc.
- Bluetooth and the Bluetooth logo are trademarks owned by Bluetooth SIG, Inc.
- Java, JME and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries.
- microSD is a trademark of SD Card Association.
- The prediction engine of the input method is TOUCHPAL, provided by COOTEK.
- To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com.
- ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
- USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
- Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/
- Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx
- Table of Contents
- Chapter 1: Getting Started
- 1.1 Your Device
- 1.2 Accessories
- 1.3 Installing SIM Cards, Battery and Memory Card
- 1. Turn the device off.
- 2. Lift to open the back cover.
- SIM card
- Memory card
- Battery
- Your device comes with a rechargeable Li-ion battery. Battery life varies depending on the network, opened applications, and the type of connections used by the device.
- Insert the battery. Make sure the contacts of the battery are aligned with the connectors on the battery slot.
- Use your fingertip to lift and remove the battery.
- Secure the hooks on the back cover with the designated holes on the device, then close the back cover.
- CAUTION
- RISK OF EXPLOSION IF BATTERY IS REPLACED
- BY AN INCORRECT TYPE.
- DISPOSED OF USED BATTERIES ACCORDING
- TO THE INSTRUCTIONS.
- 1.4 Charging the Battery
- 1.5 Turning the Device On or Off
- 1.6 Locking and Unlocking the Screen
- 1.7 Using the Headset
- 1.8 Adjusting the Volume
- Chapter 2: The Basics
- 2.1 Home Screen
- From the Home screen, you can quickly access common features and view notifications of missed calls, received messages, check battery, and connection status.
- Status Bar
- Status bar icons indicate different types of information.
- The icons on the status bar indicate the following information:
- Battery is full.
- Call is in progress.
- Battery is charging.
- Call is on hold.
- Battery is completely discharged.
- Speakerphone is on.
- Maximum signal strength. Fewer bars indicate lower signal strength.
- Missed call notification.
- No network signal.
- Sound is off.
- 3G data connection is active.
- Vibrate mode is activated.
- WiFi is connected.
- New email notification.
- New Gmail notification.
- New text message notification.
- File has been downloaded.
- A headset is connected.
- Device is connected to PC via USB connector.
- FM Radio is turned on.
- USB debugging is enabled.
- Notifications Panel
- 2.2 Customizing Home Screen
- Home screen is an extended panel user interface that gives you up-to-date information at a glance, such as time, weather, calend...
- The Home key () is the only way to launch ViewScene 3D. There is no app icon of ViewScene 3D in the apps list. In case you had t...
- From the Home screen, tap , to view the available options.
- Adding Widgets
- Widgets put at-a-glance important information and media content on your Home screen. Some of ViewScene 3D widgets are already ad...
- You may add and customize the Widgets on the Home screen as you like.
- 1. Tap and hold a blank area on the Home screen.
- 2. Tap ViewScene 3D Widget or Android Widget.
- A list of available widgets is displayed.
- 3. Tap to select the widget you want to appear on the Home screen.
- 1. Tap and hold the widget until it enlarges.
- 2. Drag the widget to the desired area on the Home screen.
- Pause at the left or right edge of the screen to drag the item into another Home screen panel.
- 3. When you are done, tap the icon to exit the editing mode.
- 1. Tap and hold the widget until it enlarges. The icon appears at the bottom of the Home screen.
- 2. Drag the widget to to delete.
- 3. When you are done, tap the icon to exit the editing mode.
- Shortcut Icons
- Shortcut icons allow you to access an application directly from the Home screen.
- 1. Tap and hold a blank area on the Home screen.
- 2. Tap Application or Android Shortcut to display the list of applications.
- 3. Tap to add the items that you want to appear on the Home screen.
- 1. Tap and hold the shortcut icon until it enlarges.
- 2. Drag the shortcut icon to the desired area on the Home screen.
- Pause at the left or right edge of the screen to drag the item into another Home screen panel.
- 3. When you are done, tap the icon to exit the editing mode.
- 1. Tap and hold the desired shortcut icon until the icon enlarges. The icon appears at the bottom of the Home screen.
- 2. Drag the icon to to delete.
- 3. When you are done, tap the icon to exit the editing mode.
- Shortcut icons allow you to access an application directly from the Home screen.
- Adding Folders
- Use folders to group related applications and other shortcuts to keep your Home screen tidy and organized.
- 1. Tap and hold a blank area on the Home screen.
- 2. Tap Folder or ViewScene 3D Widget.
- Favorite contacts and bookmarks folders can be found in ViewScene 3D Widgets menu.
- 3. If you add a folder, tap and hold on the new Folder to activate the editing mode.
- 4. Drag the application icon or shortcut and drop it on top of the folder.
- 5. By default folders will be automatically renamed according to their content.
- To change its name manually, tap the open folder button in editing mode and then tap on the folder title bar. Uncheck the “Automatic naming” check box, enter the new folder name, and tap OK.
- To remove an item from folder, tap the open folder button in editing mode and then drag and drop the item out of the folder area.
- Use folders to group related applications and other shortcuts to keep your Home screen tidy and organized.
- Changing Wallpaper
- You can customize the wallpaper of your Home screen with a default wallpaper or with pictures taken with the device.
- You can use pictures taken by the phone camera or pictures saved on the microSD card as the wallpaper
- 1. Tap > Wallpaper to display the options menu.
- 2. On the options menu, tap My Gallery.
- 3. Thumbnails of pictures saved in the microSD card appear. Tap to select a picture.
- 4. Drag your finger to select the crop area.
- 5. Tap Save to set the picture as the wallpaper.
- 1. Tap > Wallpaper to display the options menu.
- 2. On the options menu, tap Wallpapers.
- 3. All system wallpapers are displayed. Swipe your finger to the left or to the right to view the available wallpapers.
- 4. Tap to preview the wallpaper.
- 5. Tap Set wallpaper to apply your selection.
- Adding Panel
- Managing Home Screen Panels
- 2.3 3D Carousel
- The 3D Carousel shows Home screen panels bundled with all the features in a simple and intuitive 3D model. The carousel brings your entire phone features at one glance.
- Tap in Home screen to open 3D carousel.
- Use left or right gesture to move panels.
- Tap a panel to select.
- If you left the carousel idle for a few seconds, the Magic Animations of panels and widgets will be activated. An overview of installed widgets and apps will be played to explore device features.
- Once you tap the screen intending to rotate the carousel or select a panel, the Magic Animation is terminated and your tap is processed immediately.
- You can rearrange, add, or remove carousel panels. Tap the icon in carousel screen to open the 3D panels management screen.
- 2.4 Applications
- 2.5 Text Entry
- On-Screen Keyboard
- Configure Keyboard Settings
- Edit Text
- To select, cut, or copy an entire text field entry, do the following:
- To select, cut, or copy a word or a portion of text, do the following:
- 1. Touch the area where you want to place the cursor.
- 2. Touch and hold the text field box.
- 3. On the options menu, tap Select word.
- 4. From the cursor, swipe your finger across the text that you want to select.
- 5. Edit the text. To cut or copy the highlighted text, touch and hold the text field box, then touch Cut or Copy.
- To paste text, do the following:
- 2.1 Home Screen
- Chapter 3: Contacts
- Contacts is your phonebook that lets you store names, phone numbers, email addresses and other information. Contacts can be stor...
- 3.1 Opening Contacts
- 3.2 Adding Contacts
- 3.3 Copying Contacts
- 3.4 Importing and Exporting Contacts
- 3.5 Communicating with Contacts
- 3.6 Managing Contacts
- 3.7 Favorite Contacts
- 3.8 Displaying Options
- 3.9 Searching for Contacts
- 3.10 Synchronizing Contacts
- Chapter 4: Using the Phone
- Chapter 5: Email & Messaging
- Use Messaging to send and receive text and multimedia messages. Use Email to send and receive email messages using your internet email accounts.
- To open the Phone screen, do any of the following:
- 5.1 Text Message
- A text message can only contain letters, numbers, and symbols.
- Create and Send Text Messages
- The device offers several ways to create and send new text messages.
- 1. Tap or tap > Messaging.
- 2. Tap New message.
- 3. In the To field, enter the recipient’s phone number.
- 4. Tap Type to compose then type your message.
- 5. Tap or to send your message.
- 1. Tap .
- 2. Tap the Call log to view the call history.
- 3. Tap and hold a call from the Call log.
- 4. Tap Send text message.
- 5. Compose your message.
- 6. Tap or to send your message.
- The device offers several ways to create and send new text messages.
- Receive and Manage Messages
- When you send and receive messages from a contact, these messages are grouped as a message thread. A message thread looks like an exchanged conversation.
- 1. Tap or tap > Messaging.
- 2. Tap a message thread to open it.
- 3. Tap Type to compose then type your message.
- 4. Tap or to send your message.
- 1. Tap or tap > Messaging.
- 2. Tap to view a message thread.
- 3. Tap and hold a message to display the options.
- 4. Tap Forward.
- 5. In the To field, enter the recipient’s phone number.
- 6. Tap or to forward the message.
- 1. Tap or tap > Messaging.
- 2. Tap and hold the message thread that you want to delete.
- 3. Tap Delete thread.
- 4. Tap Delete to confirm.
- 1. Tap or tap > Messaging.
- 2. Tap > Delete threads.
- 3. Tap Delete to confirm.
- Use this function to save a copy of the message to the SIM card(s) memory.
- When you send and receive messages from a contact, these messages are grouped as a message thread. A message thread looks like an exchanged conversation.
- 5.2 Multimedia Message
- A multimedia message or MMS can contain letters, images, an audio or video file.
- Create and Send MMS Messages
- The device offers several ways to create and send an MMS message.
- 1. Tap or tap > Messaging.
- 2. Tap New message.
- 3. In the To field, enter the recipient’s phone number or email address.
- 4. Tap > Add subject.
- 5. Enter a subject.
- The message automatically converts to an MMS message.
- 6. Tap Type to compose then type your message.
- 7. To attach files to your message, tap > Attach, then tap one of the following:
- 8. Tap or to send your message.
- 1. Tap .
- 2. Tap the Call log to view the call history.
- 3. Tap and hold an entry.
- 4. Tap Send text message.
- 5. Tap > Add subject.
- 6. Enter a subject.
- The message automatically converts to an MMS message.
- 7. Tap Type to compose then type your message.
- 8. To attach files to your message, tap > Attach, then tap one of the following:
- 9. Tap or to send your message.
- The device offers several ways to create and send an MMS message.
- 5.3 Voice Message
- The device supports sending of voice messages.
- 1. Tap or tap > Messaging.
- 2. Tap New message.
- 3. Tap > Attach > Record audio.
- 4. Tap to record your message.
- 5. Tap to stop recording.
- 6. Tap to listen to your recording.
- 7. Tap Use this recording to proceed or Discard to return to the compose message screen.
- 8. Tap Play to listen to your recording.
- 9. Enter the recipient’s phone number in the To field.
- 10. If necessary, tap Type to compose then type your message.
- 11. Tap or to send your message.
- The device supports sending of voice messages.
- 5.4 Customizing Message Settings
- 5.5 Email Accounts
- The device can send and receive emails just as you do with a computer. It supports Internet emails, email accounts that are provided by an Internet Service Provider (ISP) or web-based emails, such as Gmail, Hotmail, Yahoo! Mail, etc.
- Set Up Email Account
- Add More Email Accounts
- 1. Tap > Email.
- 2. Tap > Accounts > > Add account.
- 3. Enter your Email address and Password.
- 4. Select Send email from this account by default to set this account as the default email account.
- 5. Tap Next. The device will automatically retrieve the email settings.
- 6. Enter Name and Account display name.
- 7. Tap Done.
- Select Email Accounts
- Delete Email Accounts
- 5.6 Using Email
- Compose and Send Emails
- Receive Emails
- Read and Reply to Emails
- Manage Email Folders
- 1. Tap > Email, then tap an email account.
- 2. On the Inbox screen, tap and hold the message.
- 3. Tap Delete.
- If you are viewing the Inbox or a messaging list screen, tap > Folders, then tap the folder that you want to view.
- If you are viewing the Inbox or messaging list screen of one account and you want to view the list of another account, tap > Accounts, then tap the account that you want to view.
- Customize Email Settings
- You can configure the settings of your email account such as account name, email checking frequency, default account, notifications, and server settings.
- 1. Tap > Email, then tap an email account.
- 2. Tap > Account settings to view the email account settings.
- 3. Tap Account name to change the account name.
- 4. Tap OK to confirm.
- 1. Tap > Email, then tap an email account.
- 2. Tap > Account settings to view the email account settings.
- 3. Tap Inbox check frequency.
- 4. Tap an option.
- 1. Tap > Email, then tap an email account.
- 2. Tap > Account settings to view the email account settings.
- 3. Tap Default account to send email from this account by default.
- You can configure the settings of your email account such as account name, email checking frequency, default account, notifications, and server settings.
- Chapter 6: Using Internet
- 6.1 Connecting to Internet
- The device connects to Internet via:
- Wi-Fi
- 1. Tap > Settings > Wireless & networks.
- 2. Tap to check Wi-Fi.
- 1. Tap > Settings > Wireless & networks.
- 2. Turn on Wi-Fi.
- 3. Tap Wi-Fi settings. The device scans for Wi-Fi networks.
- 4. Detected networks are displayed. Tap a network, then tap Connect.
- 5. If you select an unsecured network, the connection is automatically established. Otherwise, proceed to the next step.
- 6. When connecting to a secured network, you will be prompted for the password. Enter the password, then tap Connect.
- When Wi-Fi is connected, the connection icon is displayed on the status bar.
- 1. Tap > Settings > Wireless & networks.
- 2. Tap Wi-Fi settings.
- 3. On bottom of the screen, tap Add Wi-Fi network. A new window is displayed.
- 4. Follow the on-screen instructions and enter the necessary information, then tap Save to save the settings.
- 1. Tap > Settings > Wireless & networks.
- 2. Tap Wi-Fi settings > > Advanced to access and set up more advanced options.
- Cellular Data Network
- Check the availability of service and plan rates of data connections with your network service provider and obtain the following information:
- 1. Tap > Settings > Dual Sim Settings.
- 2. To enable data connection, do not check the Disable data connection check box.
- 1. Tap > Settings > Dual Sim Settings.
- 2. Enable data connection.
- 3. Tap Default data network, then select the network that you want to use for data connection.
- 4. Tap SIM1 Access Point Names or SIM2 Access Point Names to set up connection.
- 5. Tap > New APN.
- 6. Tap Name to enter a name for the connection, then tap OK.
- 7. Enter the APN, then tap OK.
- 8. Enter the Proxy, Port, Username, and Password (if available) etc., then tap OK.
- 9. Tap > Save to save your settings.
- Check the availability of service and plan rates of data connections with your network service provider and obtain the following information:
- Starting a Data Connection
- 6.2 Browsing a Web Page
- 6.3 Google Search
- 1. Tap > Google Searchor tap .
- 2. Enter the text you want to search on the search box.
- 3. As you type, matching items on your phone and suggestions from Google web search are listed.
- 4. If what you are searching for is not on the list, tap or Go. The Browser opens, displaying results of a Google search on the web.
- 6.4 Voice Search
- 1. Tap > Voice Search.
- You can also access voice search by tapping > Google Search or tapping . Then tap the icon.
- 2. A dialog opens, prompting you to speak the words that you want to search for.
- 3. When you are finished speaking, Voice Search analyzes your speech and displays the results of your search.
- If Voice Search misunderstands you, Quick Search Box presents a list of similar-sounding search terms.
- 6.1 Connecting to Internet
- Chapter 7: Using Bluetooth
- 1. Tap > Settings > Wireless & networks.
- 2. Tap the Bluetooth check box to activate Bluetooth.
- 3. To make your phone visible to others, tap Bluetooth settings and select the Discoverable check box.
- 7.1 Connecting to Bluetooth Devices
- Chapter 8: Multimedia Applications
- 8.1 Videos and Photos
- 8.2 Viewing Videos & Photos
- 8.3 Using Music Player
- Tap > Music.
- Music Screen
- Play Music
- Change Playback Options
- Create Playlists
- Add songs to a specific playlist or create a playlist.
- 1. Tap > Music.
- The Library screen is displayed.
- 2. Tap and hold the song you want to add.
- 3. Tap Add to playlist.
- 4. Select a playlist or tap New to create a new playlist.
- 1. Tap > Music.
- The Library screen is displayed.
- 2. Tap the Playlists tab.
- 3. Tap a playlist.
- 4. Tap and hold the song that you want to remove from the playlist.
- 5. Tap Remove from playlist.
- Add songs to a specific playlist or create a playlist.
- Chapter 9: Programs
- This device comes with the following pre-installed programs.
- 9.1 Backup & Restore
- 9.2 Browser
- 9.3 Calculator
- 9.4 Calendar
- The Calendar lets you schedule and sound alarms for appointments, meetings and other events. Scheduled appointments for the day can be displayed on the Home screen.
- 1. Tap > Calendar.
- 2. Tap > More > New event.
- 3. Enter the event name.
- 4. Tap the From and To date and time boxes. Tap the + and - buttons, then tap Set to set the date and time.
- 5. Enter the event location and other details.
- 6. To set repetition, select the repetition from the list.
- 7. To set a reminder, select the reminder time from the list.
- 8. When finished, tap Done to return to the calendar.
- The Calendar lets you schedule and sound alarms for appointments, meetings and other events. Scheduled appointments for the day can be displayed on the Home screen.
- 9.5 Camcorder
- 9.6 Camera
- 9.7 Clock
- 9.8 Contacts
- 9.9 Downloads
- 9.10 Email
- 9.11 File Browser
- 9.12 FM Radio
- 9.13 Gmail
- 9.14 Google Search
- 9.15 Google+
- 9.16 iRadio
- 9.17 Latitude
- 9.18 Maps
- 9.19 Market
- Android Market allows you to find and download applications and fun games to this device.
- 1. Tap > Market.
- 2. Tap Accept after reading the terms of services.
- 3. Tap Next to setup your Google account.
- 4. Tap Create to create a new account or Sign in to sign in your existing account.
- 5. Once you are signed in, you can begin searching and downloading programs from the market.
- 6. Swipe your finger to the right or left to browse the categories.
- Android Market allows you to find and download applications and fun games to this device.
- 9.20 Messaging
- 9.21 Messenger
- 9.22 Music
- 9.23 My Gallery
- 9.24 Navigation
- 9.25 Nero Mobile Sync
- 9.26 News & Weather
- 9.27 Note Pad
- 9.28 Phone
- 9.29 Places
- 9.30 RSS Reader
- 9.31 Settings
- 9.32 SIM Tool Kit
- 9.33 Talk
- 9.34 Videos
- 9.35 ViewApps
- 9.36 Voice Dialer
- 9.37 Voice Note
- 9.38 Voice Search
- 9.39 YouTube
- Chapter 10: Managing Your Phone
- 10.1 Device Settings
- Tap > Settings to view and adjust the settings of the device. The Settings menu is categorized into: Dual Sim Settings, Wireless...
- Dual Sim Settings
- Wireless & networks
- Call settings
- Sound
- Display
- Location & security
- Applications
- Accounts & sync
- Privacy
- Storage
- Language & keyboard
- Voice input & output
- Accessibility
- Date & time
- About phone
- 10.2 Changing Basic Settings
- Date and Time
- Alarms
- You can set up alarms on the device.
- 1. Tap > Clock.
- 2. Tap .
- 3. To add an alarm, tap Add alarm.
- 4. Tap the + or - buttons to set the alarm time, and tap Set.
- 5. To set repeat mode, tap Repeat. Tap one or more options, then tap OK.
- 6. To set the ringtone, tap Ringtone. Tap an option, then tap OK.
- 7. To vibrate when alarm sounds, check Vibrate.
- 8. To enter an alarm label, tap Label.
- 9. After all settings are completed, tap Done.
- You can set up alarms on the device.
- Display Settings
- The display settings of the device affect the battery and external power level.
- 1. Tap > Settings > Display.
- 2. Tap Screen timeout.
- 3. Select an option from the list.
- 1. Tap > Settings > Display.
- 2. Tap Brightness.
- 3. Drag the Brightness slider to adjust brightness settings, and tap OK.
- 1. Tap > Settings > Display.
- 2. Select Auto-rotate screen to automatically switch the screen orientation when rotating the device.
- The display settings of the device affect the battery and external power level.
- Ring Settings
- 10.3 Using Wireless & networks
- 10.4 Protecting Your Phone
- You can protect the device from unauthorized users by requiring the PIN code or entering a password.
- Enable SIM Card Lock
- When PIN code is enabled, you are required to enter the PIN code before making a call.
- 1. Tap > Settings > Location & security.
- 2. Tap Set up cards lock.
- 3. Tap Slot1 card lock setting or Slot2 card lock setting.
- 4. Select Lock SIM card to require PIN to use the device.
- 5. Enter the current PIN code.
- 6. To change the PIN code, tap Change SIM PIN.
- 7. Enter the old PIN code.
- 8. Enter the new PIN code and confirm.
- When PIN code is enabled, you are required to enter the PIN code before making a call.
- Enable Screen Lock Protection
- 10.5 Resetting the Device
- 10.1 Device Settings
- Chapter 11: Specifications
- Operating System
- Android Gingerbread
- Display
- Size: 3.5”
- Type: TFT transmissive LCD
- Resolution: 480 x 320, HVGA
- Touch panel: Capacitive-type touch lens (with LED soft key)
- Radio Band & Standard
- Dual SIM / Dual Standby (WCDMA + GSM)
- SIM 1:
- SIM 2:
- For technical support or product service, see the table below or contact your reseller.
- NOTE: You will need the product serial number.
- Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
- Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16
- ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty perio...
- ViewSonic ViewPhone are warranted for at least 1 year for labor from the date of the first customer purchase.
- User is responsible for the back up of any data before returning the unit for service. ViewSonic is not responsible for any data lost.
- This warranty is valid only for the first consumer purchaser.
- 1. Any product on which the serial number has been defaced, modified or removed.
- 2. Damage, deterioration or malfunction resulting from:
- a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
- b. Any damage of the product due to shipment.
- c. Removal or installation of the product.
- d. Causes external to the product, such as electric power fluctuations or failure.
- e. Use of supplies or parts not meeting ViewSonic’s specifications.
- f. Normal wear and tear.
- g. Any other cause which does not relate to a product defect.
- 3. Any product exhibiting a condition commonly known as "image burn-in" which results when a static image is displayed on the product for an extended period of time.
- 4. Removal, installation, one way transportation, insurance, and set-up service charges.
- 1. For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to Customer Support page). You will need to provide your product's serial number.
- 2. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
- 3. Take the original container to an authorised ViewSonic Service Centre or use the prepaid product freight option to ship to ViewSonic directly.
- 4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
- There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.
- ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
- 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, ...
- 2. Any other damages, whether incidental, consequential or otherwise.
- 3. Any claim against the customer by any other party.
- 4. Repair or attempted repair by anyone not authorized by ViewSonic.
- 4.3: ViewSonic TPC Warranty TPC_LW01 Rev. 1e 08-06-10
iii
European Union Regulatory Conformance
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz).
This equipment meets the following conformance standards: EN62209-1/2,
EN60950-1, IEC60950-1, EN50332-1/2, EN301489-1, EN301489-3,
EN301489-7, EN301489-17, EN301489-24, EN301511, EN301908-1/2,
EN300328, EN300440-1/2, EN55022, EN55024.
For the device which is tested in accordance to EN60950-1:2006, it is mandatory to
perform audio tests for EN50332. The device has been tested to comply with the
Sound Pressure Level requirement laid down in the applicable EN 50332-1 and EN
50332-2 standards. Permanent hearing loss may occur if earphones or headphones
are used at high volume for prolonged periods of time.
A pleine puissance, l’écoute prolongée du baladeur peut endommager l’oreille de
l’utilisateur.
The conformity assessment procedure has been followed with the involvement of the
following Notified Body:
PHOENIX TESTLAB
Identification mark: CE0700 (Notified Body) CE
We, hereby, declare that this cellular, Wi-Fi, & Bluetooth radio is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
Products with 2.4-GHz Wireless LAN Devices France
For 2.4-GHz wireless LAN operation of this product, certain restrictions apply. This
equipment may use the entire-2400-MHz to 2483.5-MHz frequency band (channels 1
through 13) for indoor applications. For outdoor use, only 2400-2454 MHz frequency
band (channels 1-9) may be used. For the latest requirements, see http://www.art-
telecom.fr.
This equipment may be operated in:
AT BE BG CH CY CZ DE DK
EE ES FI FR GB GR HU IE
IT IS LI LT LU LV MT NL
NO PL PT RO SE SI SK TR
0700