User's Manual

7 8
Warning Please remember the password you set, otherwise
it will cause inconvenience.
Exit menu: exit the BIOS Setup after completed the relevant setup.
NO.3.3 Install the Driver program
Supervisor password is: to display whether has settings when entering
the Setup utility; set for with pre-setting and clear for none.
User password is: to display whether has settings when entering the
Setup utility; set for with pre-setting and clear for none.
Set supervisor Password: set the password to enter Setup utility,
authority higher than User password.
Set User Password: set the password to enter Setup utility.
Authenticate User on boot: enable it ,you will ask to input password when
turn on the PC.
HDD Password State: set the password for HDD.
Please use the CD attached with the machine to operate in accordance with
the CD operation interface.
Option 1: Computer-specific driver.
Option 2: Application Software.
Choose the driver you need to install is according to the screen instruction.
System will install the driver program automatically; during the installation,
the system will need to restart.
Exit Saving Changes save the data and exit.
Exit Discarding Changes: unsave the data and exit.
Load Setup Defaults restore the factory defaults.
Discard Changes: cancel this setting, and return to the last setting.
Save Changes save the settings.
Boot menu:Set the boot device priority.
Press [ ]or [ ]on the keyboard to choose Boot, and press[ + ] or [ - ] to set up
the priority when cheeked a device.