User's Manual

General hardware problems / possible causes and solutions
Some common hardware problems and recommended solutions are in the table below:
18
1. System Ceased Operation during the Execution of the Program.
Cause: error by using the current procedure. Solution: Click <Ctrl>, <Alt> and <Del> keys. Windows operating system
causes error; restart the system by using the power supply.
2. Operating System cannot be Restored to the Using State.
If the operating system can not resume operation after a pause, please check the following possible causes:The battery
may have a malfunction, or the current power level may be very low. To solve this problem, please connect an external
power supply such as the AC adapter.
3. The System cannot Shutdown Normally.
Hold down the power button 4-6 seconds, until the system shuts down.
4. After Shutdown, if the System cannot reboot:
Connect the AC power adapter immediately; as it means that the battery did not have sufficient power to reboot.
5. Measures to Extend Battery Life?
Adjust the screen brightness to the minimum possible level.
Adjust the device screen to the normal standard.
Remove the device card if not often used.
Turn off the device Bluetooth function.
Turn off the device wireless network function.
Ensure that the power configuration setting is in the "Save power" mode.
6. The USB port of Docking can not be connected to the device?
The Docking must be supported by DC power when connect to the device.