VS16021 User Manual
Contents 1. Introduction 1 1.1. Package contents 1 1.2. Physical view 2 2. Hardware Operation 2.1. 2 How to connect the player 2 3. Software Operation 3 3.1. System boot-up 3 3.2. Settings 3 4. Technical Data 4.1.
1. Introduction This document describes the hardware of the VS16021 and terms of IAdea Limited Warranty. 1.1. Package contents Media Player Unit ADB USB cable AC Adapter (with select power plug) Ethernet cable Wi-Fi Antenna HDMI extension cord NOT INCLUDED: A USB mouse is required for system setup ATTACH the wireless antenna as shown below, and then screw antenna clockwise onto the post.
1.2. Physical view Physical features (left to right in above illustration) HDMI 1.4 connector for digital video and audio combined output ADB , Android debug console port Micro USB for power adapter Power and Status LED indicator Ethernet port for network content update Micro SD card slot USB ports for USB content update and configuration S/W Reset button to perform factory reset Wireless antenna post 2. Hardware Operation 2.1.
2 3 Plug in Ethernet cable (optional) Connect player to power via micro USB port with power adapter 3. Software Operation 3.1. System boot-up 1 After the power is supplied for approximately 40 seconds, the booting animation will be displayed on screen as shown below : 2 The boot-up process takes approximately 75 seconds to complete. Troubleshooting Tips for media players 1 The status LED lights up, but no video is displayed on screen Ensure that your video cable (HDMI) is securely connected.
(Fig. 2.2.1) Basic settings: – Network, Time zone and Content. Each time the Basic settings menu is entered, playback will automatically begin after 15 seconds if content services have been previously set. Auto playback can be canceled by clicking on the button before the countdown ends. User is able to enter Advanced Settings by clicking the Advanced button.
4. Technical Data 4.1.
IAdea Limited Warranty For Media Player Devices Applicable to IAdea product models: VS16021 1. 2. 3. 4. IAdea provides, unless extended through optional service programs, one (1) year of limited warranty on its applicable product models listed above. The applicable product must be purchased through an authorized IAdea reseller.
FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
