VSB050 (EZC-5201BS) USB Wireless Adapter User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.
Thank you for choosing ViewSonic® As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Contents Scope.................................................................................... 4 1.1 Document..........................................................................................................4 1.2 Product Feature.................................................................................................4 Requirements........................................................................ 5 2.1 Hardware Specification...........................................................
Scope 1.1 Document This document provides an overview of the requirements for the VSB050. The VSB050 is a USB Wireless adaptor, that supports both Wi-Fi 2.4G, 5G and Bluetooth 4.2 to add Wi-Fi, Bluetooth functionally to your laptops, desktop and Mac. 1.2 Product Feature • Wireless Interface: ͫ 2.4GHz - Complies IEEE 802.11b/g/n specification - Supports 20/40MHz, up to 150Mbps data rate. ͫ 5GHz - Complies IEEE 802.11a/n/ac specification - Supports 20/40/80MHz, up to 433Mbps data rate.
Requirements The following sections identify the detailed requirements of the VSB050. 2.1 Hardware Specification 2.1.1 Block Diagram 2.1.1.1 Hardware Component Chipset Detailed Description RTL8821CU 2.1.2 Hardware Interface 2.1.2.1 2.1.2.2 Feature USB Interface LED Detailed Description USB2.0 1 LED for system indicate 2.1.3 Electrical Characteristic 2.1.3.1 2.1.3.
2.1.4 Wireless Specifications 2.1.4.1 Feature Wi-Fi interface (2.4GHz) 2.1.4.2 Wi-Fi interface (5GHz) 2.1.4.3 2.1.4.4 Bluetooth Security Detailed Description Compatible with IEEE 802.11b specification Compatible with IEEE 802.11g specification Compatible with IEEE 802.11n specification Compatible with IEEE 802.11ac specification Compatible with IEEE 802.11n specification Compatible with IEEE 802.11a specification Bluetooth v4.2+HS, BLE Open/WEP/WPA/WPA2 2.2 Mechanical Requirements 2.2.1 2.2.2 2.2.
Introduction Introduction Introduction Introduction Introduction Introduction EZC-5201BS isaUSB aUSB USB Wireless Adapter that supports both C-5201BS is isa isaUSB Wireless Adapter that supports both EZC-5201BS Wireless Adapter that supports both EZC-5201BS Wireless Adapter that supports both EZC-5201BS isaUSB Wireless Adapter that supports both VSB050 (EZC-5201BS) is a USB Wireless Adapter that supports both 2.4G and 5G 2.
3.1 Windows 10 Windows 10 The driver shall be installed automatically once the VSB050 (EZC-5201BS) USB is Windows 10 The driver shall installed automatically plugged in. Windows 10 supports Wi-Fi and be Bluetooth driver of VSB050 once the EZC-5 USB is plugged in. Windows 10 supports wifi and blueto (EZC-5201BS). The driver shall be installed automatically once the EZC-5201 driver of EZC-5201. USB is plugged in. Windows 10 supports wifi and bluetooth Tips: If the driver failed driver of EZC-5201.
The wifi driver shall be installed manually from our website: MacOS https://www.ezcast.com/app/ezcast/ezc-5200/macos (please for EZC-5201) The wifi select driver EZC-5200 shall be installed manually from our website: 3.3 MacOS https://www.ezcast.com/app/ezcast/ezc-5200/macos The Wi-Fi Note: driver shall be installed manually from the our website: https://www.ezcast.
3.4 Android OS Compatible Devices VSB050 supports ViewSonic Android devices, but driver needs to be pre-installed in system by ViewSonic and supported devices listed as below. The list will be updated as upcoming new models become available. • IFP30 series • IFP50-2 series • IFP50-3 series • IFP50-4 series • IFP70 series • myViewBoard Box • myViewBoard Mouse • CDE20 series • EP5542T NOTE: VSB050 only supports Android 7 or above devices, so **couldn’t support CDE10 series.
2. When VSB050 USB dongle is plugged-in, Wi-Fi, Wi-Fi Hotspot, and BT settings will appear under Settings/Wireless & Networks menu. Connect to a Wi-Fi network a. Go to Settings > Wireless & networks > Wi-Fi > tap the toggle button to turn on Wi-Fi. b. Tap one network from the available Wi-Fi network list then input the password and tap Connect button.
Share Data Network through Wi-Fi Hotspot a. Go to Settings > Wireless & networks > Wireless hotspot > tap toggle button to turn on Portable Wi-Fi hotspot. b. When other devices try to connect the hotspot, users are required to input the password. Tap Set up Wi-Fi hotspot to change the network name, security type, and password and tap Save button. Connect to a BT device a. Go to Settings > Wireless & networks > BT > Tap the toggle button to turn on Bluetooth.
b. When Bluetooth is enabled, a list of available Bluetooth devices will appear. Tap a device to select it. c. A paring request message will appear on both Android device and the requested device with the same BT paring code. Tap on PAIR to pair with the device. d. When the Android device paired with the other device, the device name will appear in the Paired devices list.
©2019 Actions Microelectronics Co., Ltd. All right reserved. EZCast are trademarks of Actions Microelectronic Co., Ltd., registered in US, Europe, and other countries. Other product and company names mentioned herein may be trademarks other respective companies. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
Product informations Transmission 600Mbps Antenna Onboard Standard IEEE 802.11b/g/n/a/ac Driver Auto installation Interface USB 2.0 Bluetooth Bluetooth 4.
Regulatory and Service Information Please read before proceeding • Do not store your device in temperatures higher than 50°C (122°F). • The operating temperature for this device is from 0°C (32°F) to 35°C (95°F). Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit. FCC Compliance Statement This device complies with part 15 of FCC Rules.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
IC Warning Statement This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.
Copyright Information Copyright© ViewSonic® Corporation, 2020. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic® Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
Customer Service For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product’s serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/ 中国 (China) www.viewsonic.com.cn 香港 (繁體中文) www.viewsonic.com/hk/ Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/ Indonesia www.viewsonic.com/id/ Israel www.viewsonic.
Limited Warranty ViewSonic® Wireless Presentation Gateway What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, and as your sole remedy, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
• Causes external to the product, such as electric power fluctuations or failure. • Use of supplies or parts not meeting ViewSonic’s specifications. • Failure of owner to perform periodic product maintenance as stated in the User Guide. • Any other cause which does not relate to a product defect. • Damage caused by static (non-moving) images displayed for lengthy periods of time (also referred to as image burn-in). • Software - Any third-party software included with the product or installed by the customer.
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: • Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
Mexico Limited Warranty ViewSonic® Wireless Presentation Gateway What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components & accessories.
How to get service: For information about receiving service under warranty, contact ViewSonic® Customer Support (Please refer to the attached “Customer Service” page). You will need to provide your product’s serial number, so please record the product information in the space provided below on your purchase for your future use. Please retain your receipt of proof of purchase to support your warranty claim.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col. Bugambilias C.
Process Color C0 M91 Y72 K24 Process Color C0 M0 Y0 K100 Process Color C0 M91 Y72 K24 Spot Color Pantone Black C Spot Color Pantone 187 C