Specifications

30" pocket doors to separate each room and cab area. Cover pocket doors with silver
smooth FRP and cap all sides with anodized extruded aluminum. All screws shall be
stainless steel. Pocket doors shall be installed on heavy-duty aluminum tracks with two
(2) four-wheel roller trucks. Pocket door shall have recessed handles and a key lock.
All bulkheads shall be covered with Kemlite 0.075" silver smooth FRP. Cap all sides with
anodized extruded aluminum. All screws shall be stainless steel.
Cover load space doors with black powder coated aluminum panel and heavy-duty rubber
grab handle.
GALLEY/LAVATORY :
Norcold model DE0751BB or approved equal, 12 / 24 VDC / 120VAC refrigerator with
the following features:
• 2.7 cu. ft. capacity.
• Freezer shelf for ice cube tray.
• Two door bins; lower bin holds 2-liter containers.
• Integrated door latch.
Incinolet model WB 240 stainless steel electric toilet system or approved equal, with PRV
override circuit. Includes:
• 200 paper filters.
• One (1) 20A/240Vac receptacle for power connection.
• Ducting to the exterior of the vehicle.
• Trash can and chrome plated toilet paper holder.
• Return air vent.
• Sign reading: NOTICE: Ceiling vent fan is automatically disabled when Incinolet is in
operation.
Wastebasket w/hold down bracket located in restroom.
Purell or approved equal, wall mount hand sanitizer with 4 packs of solution.
Bobrick B-165 (or current model) 18" x 24" one-piece channel frame mirror with bright
polished finish and mitered corners.
SEATING:
Space Air Grid office chairs 5560 black or approved equal, with armrests, five caster
spider base, and adjustable height. Strap installed under counters to secure chair for travel.
Fabricate and install fixed bench seating with removable cushions. Bench seat cushions
shall be covered in heavy-duty vinyl.
Install seat belts for fixed bench seating on driver side of truck. Seat belts shall come with
pull test documentation.
Seat belts shall come with pull test documentation.
Fabricate and install flip-down bench seating on passenger side of truck. Bench seat
cushions shall be covered in heavy-duty vinyl. Bottom seat cushion will be installed on
Zico Quic-Seat or approved equal, fold down spring loaded seat brackets and covered
with heavy-duty vinyl.
BENCH SEAT REQUIREMENTS:
• Foam for seat backs and bottoms shall be firm density
• All bench seating material must meet Federal Motor Vehicle Safety Standards part
571.302 Flammability of Interior Materials.
• Material corners shall be squared or angled to fit precise cut of foam.
• Foam shall be bonded to plywood backer with industrial grade adhesive.