VT2205LED VT2405LED LCD TV - User Guide - Guide de l’utilisateur - Bedienungsanleitung - Guida dell’utente Model No.
Compliance Information ....................................................................................................1 Important Safety Instructions.............................................................................................2 Declaration of RoHS Compliance......................................................................................3 Copyright Information.........................................................................................................
ENGLISH Using the Teletext function............................................................................................27 Connecting video and audio signals..................................................................................29 Input options..................................................................................................................29 Connecting the Composite Video input.........................................................................
CE Conformity for European Countries The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
ENGLISH Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions. 7.
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.1% < 0.1% Cadmium (Cd) 0.
Copyright Information ENGLISH Copyright © ViewSonic Corporation, 2010. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
1.
ENGLISH Quick Start Guide 1. Please read these instructions Congratulations. You have a state-of-the-art flat widescreen digital LCD TV which should provide you with years of viewing pleasure. Please take a few minutes to read these quick start instructions through before installing and using the TV. What's in the Quick Start Guide? Section 1 contains the Quick Start Guide which provides you with enough information to setup the TV. This is section 1.
In order to prevent potential dangers and prolong the service life of the TV, please observe the following points when installing, operating and cleaning the TV. All Liquid Crystal Display (LCD) screens have a very thin protective layer of glass which is liable to marking or scratching, and cracking if struck or pressured. The liquid crystal substrate is also liable to damage under excessive force or extreme temperatures. Please handle with care.
4. Installing the Base ENGLISH Important safety notes Please pay attention to the following before installing: • For safety reasons, it is recommended that the installation be carried out by at least two adult persons. • The LCD panel of the display is extremely fragile and subject to damages easily. Avoid touching the LCD panel when installing or moving the display, and take precautions not be let any objects come into contact with the panel.
1. Cover an even stable surface with a soft cloth. Place the LCD Display unit face down on the cloth. Fit the stand onto the bottom of the LCD Display unit as shown: 2. Pull the hinge cover on the arm upward to remove it, as shown above by (2). 3. Remove the 4 screws from the hinge, then pull off the arm slowly, as shown below by (3). 4. Removal of the arm from the stand base completed. ViewSonic 9 VT2205LED/VT2405LED ENGLISH 5.
ENGLISH 6. Adjust the viewing angle This display is equipped with a adjustable base. If necessary, turn the display screen to an appropriate angle (maximum 20 degrees up and down) for more comfortable viewing. 7. Connect the antenna cable Connect a TV antenna cable fly-lead from your TV antenna system or Cable TV (CATV) to the TV input on the TV. Check to make sure that the cable connection is firmly in place. • A poor quality TV signal will produce a poor picture and/or sound on your TV.
1. Locate the power cable from the packaging, and plug the appropriate end into the AC IN socket on the rear of the TV (as illustrated below). 2. Connect the other end into an appropriate wall power outlet, and flip the main power switch on the TV to the ON ( ) position. The TV will enter standby mode and the power indicator (on the front lower right) will light up orange. • • The type of power cable plug and socket illustrated may differ from the type used in your region.
ENGLISH 9. Activate the remote control Installing batteries 1. Turn the remote control to reveal its back side, and open the lid of the battery compartment. 2. Insert the batteries (supplied) ensuring that the positive and negative marked battery terminals match the (+) and (-) marks in the battery compartment. Note that these batteries are provided for your convenience so that you can operate the display straight away. You should replace them as soon as possible. 3.
Using the remote control ViewSonic 13 ENGLISH 1. Point and aim the top front of the remote control directly at the display when pressing the buttons. 2. The remote control must be held at an angle within 30 degrees of the display's remote control sensor window to function correctly. The distance between the remote control and the sensors should not exceed 5 meters. 3.
10. Initialize your TV ENGLISH Press Power button on the remote control. the TV will turn on and the power indicator will light up blue. When first turned on (and until tuned), the Initial Menu will display: Before you can use your TV to view TV programs, you need to let it search for and tune TV station programs appropriate to your region. This process only needs to be done when the TV is newly installed, or whenever you install it in OSD menu for convenience of operation. 1.
• Always turn off the display and disconnect it from the mains power before cleaning. • Do NOT use cream, liquid, aerosol or spray cleaners. Use only a slightly damp well wrung-out (drip-free) and lint-free, clean soft cloth and lightly wipe the display. If necessary, use a pH-neutral liquid dish-washing detergent diluted with water on a separate clean lint-free cloth to remove oil or grease marks. Wipe over again with a cleandry lint-free cloth to remove any smear marks.
ENGLISH User Manual Getting to know your TV Front view 12 3 4 5 6 7 No. Name Description 1 Power Indicator • Lights up blue when the diaplay is powered on. • Lights up orange when the diaplay is in standby mode. 2 Remote Control Receiver Receives command signals from the remote control. Do not obstruct the sensor by placing any objects in front of it, which will hinder the reception of signals. 3 CH ▲/▼ button • Press these buttons to sequentially change channels.
ENGLISH Rear view A B CD E F No. Name G H I J K L MN O P Q Description A AC Power Switch Use this switch to turn the main power on/off. B AC Power Input Connect to a AC power source. C YPbPr Component Video Input Connect to the Component video (Y Pb Pr) output of video devices. D HDMI2 Input Terminal Connect to the HDMI digital audio/video output on digital video devices.
ENGLISH No. Name Description J Headphone Jack Connect to your headphones. K USB Terminal Connector for software upgrades and Media Play, etc. L HDMI3 Input Terminal Connect to the HDMI digital audio/video output on digital video devices. M SPDIF Optical output Connect this port to the SPDIF input of A/V device. N Audio In L/R Connect to the left/right audio channel output of video devices. O S-VIDEO Input Connect to the S-Video output of video devices.
Remote Control 1 2 18 19 20 3 21 4 22 5 23 6 24 7 8 25 9 10 26 27 11 28 12 13 29 30 14 31 15 32 16 33 34 17 ViewSonic 1. POWER Press this button to power the TV on or put it to the standby mode. 2. DTV/RADIO Digital TV function. Switch between DTV/RADIO programs. 3. INFO Press this button to display the input source 4. SLEEP Press this button to set the automatic shut-off timer. 5. SOUND To select sound mode from Standard, Music, Movie, Sports, and User. 6.
ENGLISH 1 2 18 19 20 3 21 4 22 5 23 6 24 7 8 25 9 10 26 27 11 28 12 13 29 30 14 31 15 32 16 33 34 17 ViewSonic 14. Green/ Rotate • Green: Function key for teletext, program edit, or electric program guide. • Rotate: Rotate the photo 90°, 180°, 270°, 360° clockwise in Media. 15. Red/ Skip (Backwards) • Red: Function key for teletext, program edit, or electric program guide. • Skip: Go to previous chapter/track/file in Media. 16. Scan (Backwards) Page up for text function. 17.
2 18 19 20 3 21 4 22 5 23 6 24 7 8 25 9 10 26 27 11 28 12 13 29 30 14 31 15 32 16 33 34 17 ViewSonic 21 VT2205LED/VT2405LED ENGLISH 1 27. LIST Display channel list. 28. FAVORITE Press this button to jump to one of the favorite channels you have stored. 29. MENU Press this button to display the OSD menu for commands and settings. Press it again to close. 30.
ENGLISH 1 2 18 19 20 3 21 4 22 5 23 6 24 31. Yellow/ Zoom • Yellow: Function key for teletext, program edit, or electric program guide. • Zoom: Magnifies the picture contents horizontally and vertically in Media. 32. Blue/ Skip (Forwards) • Blue: Function key for teletext, program edit, or electric program guide. • Skip: Go to next chapter/track/file in Media for Photo and Text. 33. Scan (Forwards) Page down for text function. 34. Stop Stops playback in Media.
Using the remote control Turning on the TV After plugging the TV's power cable into a wall outlet, the TV will enter standby mode automatically. The power indicator will light up orange. Press Power on the remote control. The TV will turn on and the power indicator will change to blue. Putting the display to standby Press Power on the remote control again, and the TV will return to standby mode. The power indicator will turn orange. The display still consumes a very small amount of power (about 0.
ENGLISH Selecting a preset audio mode Press SOUND on the remote control to select a suitable preset audio mode form Standard, Music, Movie, Sports, or User. You can also customise the User mode according to your own perference. Changing channels Selecting a channel program directly To select a program number, press the channel number first using the channel selection buttons, and then press OK. For example, to select channel 8, press , and then OK. To select channel 28, press , , and then OK.
Press the GUIDE button to display the Electronic Program Guide. Press the ▲ or ▼ button to scroll up or down the channels, ◄ or ► to change time period. To change date, press the Yellow key first, and then select date with ◄ or ►. You can also pause at a channel and press the INFO key to view the detailed program information, or press OK to switch to that program directly. You can also add a reminder on a program by pressing the Blue button.
ENGLISH Aspect ratio Description and usage Zoom1 Stretch an image to 16:9 aspect proportions and enlarges the resultant image on the screen. Zoom2 Stretch an image to 16:9 aspect proportions and enlarges the resultant image on the screen. Panorama Only stretch two sides of the image from 4:3 image to 16:9 aspect proportion. Auto To facilitate the handling of various aspect ratios of program material received by TV input. 4:3 Resize the image to 4:3 aspect proportions.
Press TEXT/MIX on the remote control to display Teletext, and again to turn it off. Teletext is only available when ATV is selected as the input source, and a signal which transmits Teletext is currently displayed. Not all TV stations and video signals broadcast Teletext. If in doubt, please contact the TV station. When Teletext displays on-screen, you can: TEXT/MIX/PICTURE • In TV Mode: Press the TEXT/ MIX/ PICTURE button to enter the Teletext mode.
ENGLISH LIST • Press this button you force the Teletext to LIST Mode. It means that row 24 (bottom row of Teletext) will not have transmitting information, only the pages that you have previously stored in the memory. • Press LIST button again to exit from LIST Mode to Teletext. INDEX • Press the Index button to return back to index page. When you press this button in Teletext mode, a CURSOR appears.
Connecting video and audio signals This TV supports the simultaneous connection of several different types of signal sources, and permits you to select whichever one of the available sources you wish to view at any time. You can press INPUT on the remote control to select an input source. • Before connecting any devices, please turn all equipment off. • To obtain the most benefit from the digital LCD screen, you should select the connection method which will provide you with the best possible signal.
ENGLISH Connecting the SCART input Connect the SCART of your output equipment to the TV's SCART terminal using a SCART cable (not provided). To view video image from these inputs, press INPUT and use ▲▼ button to select SCART then press OK button. AV Equipment SCART cable Connecting the Component Video input 1. Connect the Component Video output of your output equipment to the TV's YPbPr IN terminals using a Component Video cable (not provided).
1. Connect the S-Video output jack on your output equipment to the S-VIDEO jack on your display using an S-Video cable (not provided). Pay attention to the pins in the plugs when inserting so to keep the pins from bending. 2. Connect the S-Video audio output jack of the output equipment to the AUDIO L/R input jacks using a suitable audio cable (or a composite video cable. In this case, the yellow plug will not be used).
ENGLISH Connecting the DVI input 1. Connect the digital video output of your output equipment (for example, a PC or digital Set Top Box) to the HDMI1 IN terminal on the TV using a DVI to HDMI adaptor cable (not provided). 2. Connect the DVI audio output of your output equipment to the TV's PC AUDIO INPUT terminals using an appropriate audio cable (not provided). To view video image from this input, press INPUT and use ▲▼ button to select HDMI1 then press OK button.
Connect the USB device to the USB IN jack on TV. To view video image from this input, press INPUT and use ▲▼ button to select Media then press OK button. This unit can play the media files contained in the USB device. USB device Connecting the headset audio output This display provides a stereo headset output socket for delivering the audio signal to a stereo headset. Connect the stereo headset plug (3.5mm Mini-jack type) to the stereo headset output socket on the display using a suitable audio cable.
ENGLISH Connecting to A/V Device with SPDIF input Connect SPDIF optical cable (not provided) from A/V device into the SPDIF output connector of LCD TV. If you want to enjoy digital broadcasting through your external speakers, connect the SPDIF terminal on the back of TV to a Home Theater (or amp).
OSD (On-Screen Display) menu DTV PICTURE SOUND TIME OPTION ViewSonic ATV Input signal type SCART YPbPr HDMI AV S-Video Media • Picture Mode • Contrast • Brightness • Colour • Tint • Sharpness • Colour Temperature • Red • Green • Blue • Aspect Ratio • Skin Tone • ACE • Noise Reduction VGA • Picture Mode • Contrast • Brightness • Colour • Tint • Sharpness • Colour Temperature • Red • Green • Blue • Aspect Ratio • Skin Tone • Auto Adjust • H-Position • V-Position • Size • Phase • Sound Mode • Balance
ENGLISH Input signal type DTV ATV SCART YPbPr HDMI AV S-Video Media OPTION • Restore Factory Default • Lock System • Set Password LOCK not available • Block Program • Parental Guidance • Select • Auto Tuning • DTV Manual Tuning CHANNEL not available • ATV Manual Tuning • Program Edit • CI Information VGA The available menu items are dependent on the input source being selected. Unavailable items will be greyed out or not displayed.
You can use the On-Screen Display (OSD) menu to adjust the settings on your display. To display the OSD menu, press MENU on the display: Operations in the OSD menu For example, to adjust picture sharpness: 1. Press MENU to display the OSD menu on-screen. 2. Press ◄ or ► to select your main menu. 3. Press OK to enter the submenu. 4. Press ▲ or ▼ to make selection. 5. Press ◄ or ► to make adjustment. 6. Press MENU to close the OSD menu.
PICTURE menu ENGLISH The available menu items are dependent on the input source being selected. The illustration is for reference only. Item Picture Mode Contrast Brightness Colour Tint Sharpness Function Provides complete preferred setups adjusted for colour, contrast, brightness, tint, and sharpness to suit various viewing situations. If User is selected, you can customize individual picture setting to your satisfaction: Contrast, Brightness, Colour, Sharpness, and Tint.
Function Operation Aspect Ratio Selects through Wide mode settings. Skin Tone Skin Color adjust. (0-10) ACE Advance contrast enhance. (Standard, Low, Off, High) Range • Full • Zoom1 • Zoom2 Press ◄ or ► to • Panorama change selection. • Auto • 4:3 • Under Scan 0 to 10 Press ◄ or ► to change selection or make adjustment. Noise Select to reduce the noise level of connected Reduction equipment.
ENGLISH Setting up User Picture mode You can adjust the settings in the Picture menu and save them as your Personal Picture Mode. You can press PICTURE on the remote control to select these modes directly. 1. Press MENU to display the OSD menu on-screen. 2. Press ◄ or ► to select PICTURE, and then press OK to enter the PICTURE menu. 3. Press ▼ to select Picture Mode, and then press ◄ or ► to select User. 4.
SOUND menu ENGLISH The available menu items are dependent on the input sourcebeing selected. The illustration is for reference only. TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. Item Function Operation Sound Mode Selects a sound type when viewing programs or videos that support multiple sounds. If you select the User mode, you can individually set the Bass and Treble.
TIME menu ENGLISH The available menu items are dependent on the input sourcebeing selected. The illustration is for reference only. Item Function Operation Clock Selects to set the current clock. When in DTV input source, Clock cannot be adjusted. The clock will be synchronized with TV broadcasting. Off Time Allows to set the Off timers that the TV will Press OK, use ◄ or ► to change switch off automatically at the time you select. selection.
OPTION menu ENGLISH The available menu items are dependent on the input sourcebeing selected. The illustration is for reference only. Item Function Operation Language Select your desired language for the OSD menu. Audio Select your desired language for audio. (only Languages available in DTV) Subtitle Language Hearing Impaired Country Allows to display subtitle on the screen.
ENGLISH Item Function HDMI Audio When in HDMI1 input, select where the audio source comes from Auto, PC In, HDMI. Backlight Adjusting the backlight brightness. Restore Factory Default Restores factory settings. ViewSonic Operation Press ◄ or ► to change selection. Range • Auto • PC In • HDMI • Home • Medium • Low • High Press OK, use ◄ or ► to select "Yes" to confirm.
LOCK menu Item ENGLISH The available menu items are dependent on the input source being selected. The illustration is for reference only. Use the function, must enter a four-digit password. The factory password is 0000. Function Lock System Selects to activate the TV Lock programs. Allows to set the password. Set Password Use the function, must enter a four-digit password. The factory password is 0000. Block Selects to setup the TV Program Lock options.
CHANNEL menu ENGLISH The available menu items are dependent on the input source being selected. The illustration is for reference only. Item Function Operation Select Selects the Auto Tuning range. Press ◄ or ► to change selection. Press the OK button, the Auto Tuning Auto Tuning automatically creates a list of receivable channels. DTV Allows adjustment manually for the particular Manual channel with optimal reception.
Connecting CI(Common Interface) card 1. TO INSERT A CI CARD Insert the CI card into the slot in the direction of the arrow until it fits. 2. TO REMOVE A CI CARD When removing the CI card, do not attempt to pull it from its slot. Please push the EJECT button as illustrated below. 3. This function enables you to watch the scrambled services (pay services) in some channels. If you remove the CI Module, you can watch the available digital/analogue programme in some channels.
ENGLISH Media Play - USB Device Precautions when using a USB device • MTP (Media Transfer Protocol) is not supported. • This unit supports only USB Flash Drive with FAT32 format. This TV is not guaranteed the USB Flash Drive with other formats (such as FAT16 or NTFS). • Certain types of USB Digital camera and audio devices may not be compatible with this TV. Media only guarantees to support USB Flash Drive.
ENGLISH Media Screen Display Media List Section: This field shows types of supported Media (Photo and Text). Folder Management Section: Shows the detail information of Folders and File Names. Help Items - BACK button: Exits the current menu and return back to main menu. - OK button: Enter the sub-menu or mark (or unmark) the selected files. - ▲/▼/◄/► button: move the cursor. Preview Section: This field shows the preview of the media file.
ENGLISH Viewing Photo or Slide Show Basic Operating Instruction 1. Press ◄ or ► to choose PHOTO icon, then press OK to select. 2. Press ▲ or ▼ to choose the sub-folder if necessary, then press OK to enter the folder. 3. Press ▲ or ▼ to move the light-bar cursor, the photo preview will be shown. Supported Media File This TV can only support JPEG and BMP files for Photo. Photo with higher resolution (higher than 1920x1080) will be downscaled accordingly. Play a Slide Show within a folder 1.
ENGLISH Display the Text Basic Operating Instruction 1. Press ◄ or ► to choose TEXT icon, then press OK to select. 2. Press ▲ or ▼ to choose the sub-folder if necessary, then press OK to enter the folder. 3. Press ▲ or ▼ to select the desired media file. Supported Media File This TV can only supports .txt formatted files for TEXT. Display all TEXT files within same folder 1. Follow the instruction above to enter the desired sub-folder. 2. Press to start displaying text. 3.
ENGLISH Other Information VT2205LED Dimensions ViewSonic 52 VT2205LED/VT2405LED
ENGLISH VT2405LED Dimensions ViewSonic 53 VT2205LED/VT2405LED
ENGLISH Specifications Model Weight (Net) with stand with stand Dimensions (W × H × D) without stand LCD panel size (LED Backlight) Aspect ratio Native resolution Brightness (typical) Built-in speakers Signal input Signal output Power supply Power consumption Operating temperature Storage temperature Video systems VT2205LED VT2405LED 3.9 Kg 4.7 Kg 518.2 x 386.6 x 218.3 mm 563.3 x 413.2 x 218.3 mm 518.2 x 332.7 x 39.0 mm 563.3 x 358.2 x 39.0 mm 54.69 cm (21.53") 59.82 cm (23.
Resolution 720 × 400 640 × 480 640 × 480 640 × 480 800 × 600 800 × 600 800 × 600 800 × 600 1024 × 768 1024 × 768 1024 × 768 1152 x 864 1280 x 960 1280 × 1024 1280 × 1024 1440 x 900 1400 x 1050 1680 x 1050 640 x 480 832 x 624 1152 x 870 1920 x 1080 H-Frequency (KHz) 31.469 31.469 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 67.500 60.000 63.981 79.976 55.935 65.316 65.290 35.000 49.725 68.681 67.500 V-Frequency (Hz) 70.080 59.940 72.809 75.000 56.250 60.317 72.188 75.000 60.004 70.069 75.
ENGLISH Supported Component Video input signal resolutions Resolution 720 × 480 720 × 480 720 x 576 720 x 576 1280 × 720 1280 × 720 1920 × 1080 1920 × 1080 1920 x 1080 1920 x 1080 H-Frequency (KHz) 15.735 31.25 15.625 31.25 45 37.5 28.13 33.75 56.25 67.5 V-Frequency (Hz) 60i 60p 50i 50p 60p 50p 50i 60i 50p 60p Clock Frequency (MHz) 13.5 27 13.5 27 74.25 74.25 74.25 74.25 148.5 148.
Before connecting the display to a PC to display PC video, please follow the instructions below (in Windows XP for example) to setup appropriate output resolution. 1. On Windows Desktop, right-click and select Properties from the menu that appears. 2. Click the Settings tab in the window that follows. 3. Drag the Resolution slider and select a compatible resolution according to "Supported PC (D-Sub/DVI) input signal resolutions" on page 55.
ENGLISH Safety Precautions This LCD TV is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the LCD TV as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. Warnings • This LCD TV should be operated only at the correct power sources indicated on the label on the rear end of the LCD TV.
Please check the following list for common symptoms you might be facing, and attempt the following steps to diagnose and fix the problem yourself: Symptoms The display does not turn ON There is no picture or sound Improper screen position or size The image appears distorted "Not supported" appears ViewSonic Possible causes • Check that the power plug is securely inserted into both the AC-IN socket on the display and the wall outlet, and that the wall outlet is switched on (if switched).
Customer Support ENGLISH For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/Region Web Site Email Austria www.viewsoniceurope.com/aus/ service_at@viewsoniceurope.com Belgium www.viewsoniceurope.com/befr/ service_be@viewsoniceurope.com Bulgaria www.viewsoniceurope.com service_bg@viewsoniceurope.com Czech Republic www.viewsoniceurope.com/cz/ service_cz@viewsoniceurope.com Denmark www.viewsoniceurope.
Limited Warranty ViewSonic 61 VT2205LED/VT2405LED ENGLISH VIEWSONIC LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
