User guide

Getting Started
3
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to the
wall, please consider the following guidelines:
Read the Important Safety Instructions, at the start of this manual. •
Do • not install in a moist or wet environment. This equipment is intended for indoor use.
Do • notinstallnearheatsource,orstrongmagneticelds.
Use only • ViewSonic approved wall-mounting brackets to support the LCD TV weight.
Before attaching the wall mount plate to the back cover, ensure the product is working.•
IfyourLCDTVisalreadysetupforfree-standingoperation,youneedtorstremovethestandbefore•
mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
Disconnect the power and any other cables that might hinder moving the LCD TV. •
Set the LCD TV on a table or work surface, placing the screen face down on a towel or woolen blanket to •
protect the screen surface from damage while installing plate.
Before installing the LCD TV on the wall, ensure you have recorded the product serial number on page (i) •
of the User Guide, as you will need the serial number to request service should there be a service need.
Install the wall mount plate to the LCD TV using screws • NO LONGER than 12mm, as longer screws
found in universal (non-ViewSonic) wall mount kits may damage the power supply causing the unit to fail.
The wall-mount screw type is M6 x L12.
Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation. Ensure •
there is at least 3cm of space surrounding any air-vents of your LCD TV to allow adequate cooling during
operation.
Hang the LCD TV wall mount plate to the wall mount bracket, completing installation. •
Enjoy your ViewSonic LCD TV!