User guide

Using the TV Features
14
Operation
Turning the TV On and Off
Press
on the remote control.
You can also use the
key on the front side of the panel.
j If there is no input signal within 10 minutes, TV will be turned off automatically.
Initial Setup
WhenrstturningtheTVon,thereisnochannelstoredinthememoryandthedisplayshows“NoSignal”.
To scan for available channels:
1. Press MENU to display the OSD main menu.
2.Press◄or►toselectCHANNEL menu, then press ENTER to enter
the menu.
3.Press▲or▼toselectSignal Type,anduse◄or►toselectthe
antenna connection to Air or Cable.
4.Press▲or▼toselectAuto Channel Search, then press ENTER to
enter to perform channel scan.
5. The channel scan may take a while to complete, and after it is done, the
screenwillreturntotherstfoundchannel.
To stop scanning, press MENU at any time.
SOURCE
POWER
1 2 3
CHANNELCHANNEL
Channel List
Favorite List
Channel Settings
Signal Type Air
Auto Channel Search
DTV Signal 0%
:Return :Move
MENUMENU
Execute
:Press to Execute
ENTERENTER
AUTO CHANNEL SEARCH - AirAUTO CHANNEL SEARCH - Air
:Stop Auto Channel Search
ENTERENTER
:Skip
MENUMENU
Now Searching... Please Wait...
Return
Analog Channels Found: 2
Digital Channels Found: 0
1%
CHANNELCHANNEL
Channel List
Favorite List
Channel Settings
Signal Type Air
Auto Channel Search
DTV Signal 0%
:Return :Move
MENUMENU
Execute
:Change Setting