VT3210LED/VT4210LED LED TV - User Guide - Guide de l’utilisateur - Guida dell’utente IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.
Compliance Information....................................................................................... i Declaration of RoHS Compliance....................................................................... ii Copyright Information........................................................................................ iii Product Registration........................................................................................... iii TV Wall Mount....................................................
ENGLISH No Signal Power Down........................................................................................... 24 Using the OSD Menu.............................................................................................. 25 Customizing the Picture Settings............................................................................ 25 Customizing the Audio Settings.............................................................................. 27 Customizing the Preferences Settings............
FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
ENGLISH Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.
Copyright © ViewSonic® Corporation, 2011. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
TV Wall Mount ENGLISH To find the perfect mount for VT3210LED / VT4210LED, please browse www.viewsonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775. Safety Instructions The symbol is intended to alert the user to presence of un-insulated “Hazardous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Do not expose this TV to rain or moisture. It may increase the risk to fire or electronic shock. Dangerous Voltage: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of dangerous voltage within the inside of the product that may be sufficient level to constitute a risk of electric shock to persons.
and resulting in a fire or an electric shock. • Do not convert or damage the power cord. • Avoid power cord being rolled over or rested upon. • When the power cord is plugged in, do not move the TV. • Keep the power cord away from heat sources. • When you disconnect the AC power cord, disconnect it from the wall outlet first. • When disconnecting the power cord, grasp the plug instead of pulling the power cord. • Use only an original ViewSonic AC power cord, not other brands.
Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. Do not install the outdoor antenna system near of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.
ENGLISH cloth or other materials. • Never block the slots and openings by placing the TV on a bed, sofa, rug or other similar surface. • Never place the TV in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided. Leave some space around the TV set as shown below. Otherwise, air-circulation may be inadequate and cause overheating, which may cause a fire or damage to the TV set. Installed on the wall • Do not let this TV get wet.
ViewSonic ix VT3210LED/VT4210LED ENGLISH power cord before touching the TV. Otherwise electric shock may result. Handling of broken glass and liquid crystal leakage If the LCD panel gets damaged, crystalline liquid leakage may occur, or scattered broken glass may result. Do not touch broken glass or crystalline liquid which is toxic, with bare hands as cuts, poisoning or skin irritation may occur. Also do not glass fragments or leaked crystalline liquid get into your eyes or mouth.
Getting Started ENGLISH List of Features 1. Enjoy HDTV with 1366 x 768 (32’’), 1920 x 1080 (42’’) native image resolution. 2. Built-in digital tuners (HDTV, NTSC, Clear QAM-digital cable). 3. Multiple video/computer inputs: HDMI (x2), VGA, one set of YPbPr (Component)/Video (Composite) 4. 5. 6. 7. input (Includes standard A/V connections. These are switched by AV input mode (see page 29).) Digital Audio Out optical audio connection with Dolby® Digital optical output format.
ENGLISH Getting Started Installing the LED TV Disconnecting the stand 1. Place the TV face down on a soft cloth or cushion on a table. 2. Remove the screw securing the base to the stand. 3. Remove the base. Installing the stand 1. Place the TV face down on a soft cloth or cushion on a table. 2. Attach the base to the stand with 4 screw.
Mounting ViewSonic LED TV to the wall The LED TV can be used in a free standing or wall-mounted position. Before installing the product to the wall, please consider the following guidelines: • • • • • • Read the Important Safety Instructions, at the start of this manual. Do not install in a moist or wet environment. This equipment is intended for indoor use. Do not install near heat source, or strong magnetic fields. Use only UL approved wall-mounting brackets to support the LED TV weight.
ENGLISH Getting Started Wall Mount Kit Specifications (VESA) When attaching to other building materials, please contact your nearest dealer. A C B D Product Family LED TV LED TV • • • Model VT3210LED VT4210LED VESA Spec. (A x B) 200 x 200 mm 200 x 200 mm Standard Screw (C x D) M6 x L13 M6 x L10 Quantity 4 4 ViewSonic provides the standard dimensions for wall mount kits as shown in the table above.
Getting Started ENGLISH Front and side View 3 4 8 5 9 6 7 10 2 Item Description 3 Green LED Remote sensor USB port 4 POWER 5 ARROWS pq +- 6 MENU (ENTER) 7 EXIT 8 CHANNEL pq 9 VOLUME +- 10 INPUT 1 2 1 ViewSonic Power LED (Green) = Power indicator Point the remote control toward this remote sensor. To access photo files. Press to turn the TV on and off.
ENGLISH Getting Started Rear View 1 2 3 DIGITAL AUDIO OUT Power Cord DIGITAL AUDIO OUT 6 Item 1 2 3 5 4 Description VGA IN For use when connecting a personal computer. VGA/HDMI-1 (AUDIO) IN VGA audio input terminal is shared with HDMI-1 analog audio input terminal, and its use can be configured in the Audio Setup menu. VIDEO IN These include standard A/V connections. These are switched by AV input mode (see page 29).
AV connection Connect the composite video and audio input jacks to the corresponding output jacks of your A/V device. • • • VIDEO: Composite Video input [3] YPbPr: Component Video input [3] AUDIO: AV Audio input [3] HDMI connection HDMI (High-Definition Multimedia Interface) is a licensable audio/video connector interface for transmitting uncompressed, encrypted digital streams between an HDMI equipped TV and an HDMI equipped audio/video equipment.
ENGLISH Getting Started Connecting the LED TV Cable System or VHF/UHF Antenna System Enjoy the high-definition and standard-definition digital programming along with standard definition analog programming. • This TV is capable of receiving unscrambled digital programming for both cable and external VHF/ UHF antenna. • We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial cable (not supplied) to ensure the best picture quality.
HD Cable Box/HD Satellite Box You can also enjoy high-definition programming by subscribing to a high-definition cable service or a high-definition satellite service. For the optimum picture quality, be sure to connect this device to your TV via the HDMI on the back of your LED TV.
ENGLISH Getting Started Personal Computer Use the LED TV as the monitor of your computer. The picture below shows the connection for PC. The LED TV can also be connected to PC with DVI or HDMI output. Rear of TV Connect to an HDMI compatible PC with the HDMI cable Audio cable VGA 15 Pin cable • • Connect the VGA Signal In jack to the PC using a 15-pin cable. Connect the VGA Audio In jack to the PC using an audio cable.
Getting Started ENGLISH Other Equipments DIGITAL AUDIO OUT DIGITAL AUDIO OUT Home Theater DVD Player/ VCD Player/ Game System Speakers PC VHF/UHF Cable *PC Blu-ray Disc Player/PS3 Audio System Digital Satellite Receiver PC DVD Player Digital Cable Box *Note: For DVI connection please use DVI-to-HDMI cable/adapter.
ENGLISH Getting Started Acceptable signal formats for VGA IN and HDMI terminals VGA IN signal formats Note: Depending on the connected PC, the following status may occur; incorrect display, false format detection, picture position failure, blur, or judder. But this is not a malfunction of your TV. Format Resolution V. Frequency H. Frequency Pixel Clock Frequency VGA SVGA XGA 640 × 480 800 × 600 1024 × 768 1280 × 768 1360 × 768 59.940Hz 60.317Hz 60.004Hz 59.870Hz 60.015Hz 31.469kHz 37.879kHz 48.
Using TV Features ENGLISH Remote Control and TV Controls Inserting Remote Control Batteries 1. Remove the battery cover by pulling then lifting the knob on the cover. 2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3. Reattach the battery cover. CAUTION • • • • • • Only use the specified AAA batteries. Do not mix new and old batteries. This may result in creaking or leakage, which may pose a risk of fire or lead to personal injury.
ENGLISH Using TV Features Remote Control and TV Controls Button 1 2 3 4 5 PC CV-90283T ViewSonic Description Press to turn the power on from standby mode. Press again to return to the standby mode. Use to key in the channel number. See “Changing Channel keys Channels” on page 24 for more details. Press to return to the last viewed channel or source.
Using TV Features ENGLISH Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the Power button on the side of the panel. Changing Channels Using the Channel Button Change channels using the + CH - button, and the TV changes channels in sequence. You will see all channels that have been memorized. Channels erased or not memorized will not be shown. Using the Channel Keys Switch to the desired channel using the channel keys (0-9 and “-”).
ENGLISH Using TV Features Using the OSD Menu Read this section to learn how to make adjustments to your TV settings. 1. Press POWER to turn the LED TV on. 2. Press MENU on the remote control to display the Main menu. 3. When a menu is open, use the up/down/left/right arrow buttons (pq t u) on the remote control to move in the corresponding direction in the menu. 4. Press ENTER to save your menu settings or select a highlighted item. (A highlighted menu item appears in a different color in the menu.) 5.
Picture Settings Noise Reduction Dyna-Backlight This function automatically strengthens the black coloring of dark areas in the video according to the level of darkness. Brightness Controls the overall brightness of the picture. Color Controls the overall color of the picture. Tint Controls the difference between the green and red regions of the picture. Sharpness Increase this setting to see crisp edges in the picture; decrease it for soft edges.
ENGLISH Using TV Features Customizing the Audio Settings Allows you to make adjustments to your audio settings. 1. 2. 3. 4. Press MENU and highlight the Sound menu icon. Press ENTER or u to open the Sound menu. Use pq to highlight an individual Sound option. Use ENTER and t u to change the settings, then press EXIT to exit. The Sound menu includes the following options: Digital Audio Selector Audio Settings ViewSonic Closed Caption Refer to the CC Selector.
Audio Setup ViewSonic PC Audio Allows you to output or mute the sound from your PC when connecting using the VGA IN terminal and an analog RGB cable. HDMI 1 Audio Selects the HDMI 1 audio mode.(Auto is the recommended mode.) • Auto: When viewing the HDMI 1 input, if digital audio from the HDMI input is available, it will be output. If not, the TV will automatically detect and output analog audio from the PC Audio input.
ENGLISH Using TV Features Customizing the Preferences Settings Allows you to customize the Preferences settings. 1. 2. 3. 4. Press MENU and highlight the Preferences menu icon. Press ENTER or u to open the Preferences menu. Use pq to highlight an individual Preferences option. Use ENTER and t u to change the settings, then press EXIT to exit.
Using TV Features ENGLISH Customizing the Locks Settings Allows you to customize the Locks settings. 1. 2. 3. 4. 5. Press MENU and highlight the Locks menu icon. Press ENTER or u to open the Locks menu. Enter your four-digit PIN code. Use pq to highlight an individual Locks option. Use ENTER and t u to change the settings, then press EXIT to exit. Note: 1. The Lock System screen will appears if a PIN code has not been stored.
ENGLISH Using TV Features Edit Rating Limit (Movies) Ratings X NC-17 R PG-13 PG G Description and Content themes X-rated (For adults only) Not intended for anyone 17 and under Restricted (Under 17 requires accompanying parent or adult) Parents Strongly Cautioned (Some material may be inappropriate for children under 13) Parental Guidance Suggested (Some material may not be suitable for children) General Audience (Appropriate for all ages) Rating E C C8+ Canada Rating (English) G PG 14+ 18+ Description
Using TV Features ENGLISH Customizing the Setup Settings Allows you to customize the Setup settings. 1. 2. 3. 4. Press MENU and highlight the Setup menu icon. Press ENTER or u to open the Setup menu. Use pq to highlight an individual Setup option. Use ENTER and t u to change the settings, then press EXIT to exit. [Contains the Terrestrial and System Status menus] Installation Terrestrial • Input Configuration Configures the antenna input source for the TV terminal.
ENGLISH Using TV Features HDMI-CEC Setup Enable HDMI-CEC Select ON/OFF to activate/deactivate HDMI-CEC control. TV Auto Input Switch If a connected HDMI device starts playing video or audio, the TV will automatically switch to the appropriate HDMI input. TV Auto Power If a HDMI-CEC device is turned on, the TV turns on automatically. Device Auto Power If the TV is turned off the TV will send a message to turn off all of the HDMI-CEC devices connected to the TV.
Other Information • • ENGLISH Cleaning the LED TV Make sure the LED TV is turned off. Never spray or pour any liquid directly onto the screen or case. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2.
ENGLISH Other Information Troubleshooting Please contact ViewSonic service team directly if you have questions, service needs, or require technical assistance related on the use of your television. Contact ViewSonic Service Team at: http://www.ViewSonic.com Or call our service team: United States 1-800-688-6688 Canada 1-866-463-4775 Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try.
Picture problems Poor color or no color • The station may have broadcast difficulties. Try another channel. • Check the AV Input mode when you use Video or YPbPr (page 29). • Adjust the Tint and/or Color (page 26). Poor composite picture • If the TV is connected to an external A/V device (e.g., DVD player, video game system, set-top box, etc.) try using YPbPr or HDMI video connection instead.
ENGLISH Other Information • • Channel tuning problems • • • Closed caption problems Rating blocking (V-Chip) problems • • • • • No HDMI-CEC operation • • HDMI problems • • ViewSonic If the program or video you selected is not closedcaptioned, no captions will display (page 29). If text is not available, a black rectangle may appear. If this happens, turn off the closed caption feature (page 29).
Other Information ENGLISH Specifications VT3210LED / VT4210LED For 32" Type LCD Color Filter Glass surface Native Resolution Display area Full Scan Dimensions Physical(W) x (H) x (D) Weight Net Regulations Power consumption On Standby 32” HD Active Matrix RGB Pixel Pitch: 0.17025 (H) x 0.51075 (V) mm RGB vertical stripe Anti-Glare 1366 x 768 697.6845 mm (H) x 392.256 mm (V) 27.47” (H) x 15.44” (V) 775.5 mm x 512 mm x 198.2 mm 30.53” x 20.16” x 7.8” 8.1 kg (17.
Other Information ENGLISH RGB RF Input signal Video USB Audio Compatibility PC Video (composite) YPbPr (component ) Resolution Table HDMI Speaker output Audio output Power Operating conditions Storage condition Voltage Temperature Humidity Altitude Temperature Humidity Altitude 15-Pin D-sub Analog RGB, Separate Sync.
Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/Region Website T = Telephone F = FAX Email United States www.viewsonic.com T (Toll-Free)= 1-800-688-6688 T (Toll)= 1-424-233-2530 F= 1-909-468-3757 service.us@viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 F= 1-909-468-3757 service.ca@viewsonic.com Latin America (Argentina) www.viewsonic.
ENGLISH Other Information Limited Warranty VIEWSONIC LED TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Mexico Limited Warranty VIEWSONIC LED TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components & accessories.
ENGLISH Other Information Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Distribuciones y Servicios Computacionales SA de CV.
