User guide

38 39
Channels
Enter the channels submenu, and choose from Channel Scan, Update Scan, Single RF
Scan, Analogue Manual Scan, Favourite Network Select,
Channel Skip, Channel Sort, Channel Edit, Decoder, Analogue Ch Fine Tune, and
Clean Channel List.
Channel Scan
Channel Scan will re-tune the television automatically. It is
recommended to run the channel scan periodically to ensure that all
new services are added.
Update Scan
Search the new channels automatically that are not in the channel
list.
Single RF Scan
(Digital Only)
Enter the single RF scan in the Channels submenu to scan digital
channels.
Analogue Manual
Scan
The television can be tuned-in manually using analogue
manual scan. Use the number keys to enter the start
frequency to scan up or scan down.
Favourite
Network Select
If there are more than two networks detected after running the auto
scan in channels menu, you can select the network you prefer.
Channels
Channel Skip
To prevent certain programs from being viewed by pressing
P
/ buttons on the remote control, the programme
position can be skipped.
Tip: The skipped programme may not be found by pressing P
/
buttons but can be access by pressing number buttons directly.
Channel Sort Change the order of the channel list.
Channel Edit
Enter the Channel Edit in the Channels submenu to edit the
channel number and channel name by using the number
buttons 0~9.
Decoder (Analogue
Only)
Channel decode support the Canal+ (paid television channel),
however, the channel also broadcast some un-encrypted programs.
These programs without encryption can be viewed free of charge.
Analogue Ch Fine
Tune
Select Analogue Ch Fine Tune in the Channels submenu to adjust
the frequency.
Clean Channel List Cleans the channel list that you had stored.