User Manual

Wall Mounng

Refer to the table below for the standard dimensions for wall mount kits.

NOTE: For use only with a UL cered wall mount kit/bracket. To obtain a wall-

mounng kit or height adjustment base, contact ViewSonic® or your

local dealer.

Maximum

Hole paern

(W x H)

Interface Pad

(W x H x D)

Pad Hole

Screw Specicaon

& Quanty

14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm

M4 x 10 mm

4 pieces

NOTE: Wall mount kits are sold separately.

1. Turn o the device and disconnect all cables.

2. Place the device on a at, stable surface with the screen facing down.

3. Press and hold the quick release tab and carefully li the stand.

4. Pull down slightly to disengage the hooks and remove the stand.