XG270QG Display User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
Thank you for choosing ViewSonic® As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Safety Precautions Please read the following Safety Precautions before you start using the device. • Keep this user guide in a safe place for later reference. • Read all warnings and follow all instructions. • Sit at least 18" (45 cm) away from the device. • Allow at least 4" (10 cm) clearance around the device to ensure proper ventilation. • Place the device in a well-ventilated area. Do not place anything on the device that prevents heat dissipation. • Do not use the device near water.
• When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED. • Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the point where it emerges from the equipment. Ensure that the power outlet is located near the equipment so that it is easily accessible. • Only use attachments/accessories specified by the manufacturer.
Contents Safety Precautions........................................................ 3 Introduction................................................................. 7 Package Contents....................................................................................................7 Product Overview....................................................................................................8 Initial Setup.................................................................. 9 Installing the Stand......
Advanced Features and Settings................................. 45 Blue Light Filter and Eye Health.............................................................................45 Quick Access Blue Light Filter Setup....................................................................... 45 Calculating Breaks.................................................................................................. 46 Looking at Distant Objects............................................................................
Introduction Package Contents • • • • Monitor Power cord Video cable Quick start guide NOTE: The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information.
Product Overview Front View Elite Hood Elite Hood Display screen Power LED Power Key Quick Access Key Joy Key Rear View DC IN DisplayPort Audio Out USB Upstream USB Downstream HDMI NOTE: For more information about the [●] / [◄] / [►] / [▲] / [▼] key and its functions, refer to “Hot Keys” on page 27 8
Initial Setup This section provides detailed instructions for setting up your monitor. Installing the Stand 1. Place the monitor on a flat, stable surface with the screen facing down. 2. Align and connect the two (2) points on the monitor stand’s base with the monitor stand’s neck. 3. Use the captured screw in the monitor stand’s base and secure it to the monitor stand’s neck.
4. Align and slide the upper hooks of the monitor stand into the stand mounting slots as shown in the illustration below: NOTE: Ensure the stand is secure and the quick release tab positively clicks into place.
5. Using the stand’s handle, lift the device into its upright position on a flat, stable surface. NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.
Installing and Removing the Elite Hood 1. Prepare both pieces of the Elite Hood as well as a screwdriver. 2. Ensure the hood pieces are in the correct orientation: TOP BOTTOM 3. Line up each screw of the Elite Hood piece with the screw holes on the side of the monitor. 4. Carefully attach the Elite Hood to the monitor, making sure not to over-tighten the screws. 5. To remove the Elite Hood, reverse the previous steps.
Wall Mounting Refer to the table below for the standard dimensions for wall mount kits. NOTE: For use only with a UL certified wall mount kit/bracket. To obtain a wallmounting kit or height adjustment base, contact ViewSonic® or your local dealer. Maximum Hole pattern Loading (W x H) 14 kg 100 x 100 mm Interface Pad (W x H x D) Pad Hole Screw Specification & Quantity 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm 4 pieces NOTE: Wall mount kits are sold separately. 1.
5. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm). 100 mm 100 mm 6. Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
Using the Security Slot To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object. Below is an example of setting up a security slot locking device on a table.
Making Connections This section guides you on how to connect the monitor with other equipment. Connecting to Power 1. Connect the power cord to the power adapter. 2. Connect the power adapter to the DC IN jack at the rear of the device. 3. Connect the power cord plug to a power outlet.
Connecting External Devices HDMI Connection Connect one end of an HDMI cable to the HDMI port of your monitor. Then connect the other end of the cable to the HDMI port of your computer. NOTE: The monitor is equipped with one HDMI 1.4 port.
DisplayPort Connection Connect one end of a DisplayPort cable to the DisplayPort port. Then connect the other end of the cable to the DisplayPort or mini DP port of your computer. NOTE: To connect the monitor to the Thunderbolt port (v. 1&2) on your Mac, connect the mini DP end of the “mini DP to DisplayPort cable” to the Thunderbolt output of your Mac. Then connect the other end of the cable to the DisplayPort port of the monitor.
USB Connection Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable to a USB port of your computer. NOTE: The monitor supports two (2) types of USB ports. When making the connection(s), observe the following guidelines: • Three (3) USB Type A ports: Connection for your Type A peripheral device(s) (i.e. storage device, keyboard, mouse). ͫ NOTE: To use some peripherals, please ensure your computer is also connected to the monitor’s USB Type B port.
Audio Connection Plug the audio jack of the ear-/headphones into the Audio Out port of the monitor. Additionally, you can connect the monitor to a sound bar using an audio cable. NOTE: The monitor is also equipped with dual speakers.
Using the Monitor Adjusting the Viewing Angle For optimal viewing, you can adjust the viewing angle using any of the following methods: Height Adjustment Lower or raise the monitor to the desired height (0 to 120 mm). NOTE: When adjusting, press down firmly along the adjustment track holding the monitor with both hands on the side.
Tilt Angle Adjustment Tilt the monitor forwards or backwards to the desired viewing angle (-5˚ to 20˚). NOTE: When adjusting, support the stand firmly with one hand while tilting the monitor forwards or backwards with the other hand. Screen Orientation Adjustment (Monitor Pivot) 1. Adjust the monitor height to the highest position. Then tilt the monitor backwards to the full tilt position. NOTE: Ensure the Elite Hood is removed or folded in prior to pivoting.
2. Rotate the monitor 90° from landscape to portrait orientation. NOTE: • When adjusting, make sure to hold both sides of your monitor firmly with both hands. • To rotate the screen image, manually change the computer system’s display orientation settings.
Swivel Angle Adjustment Swivel the monitor to the left or right for the desired viewing angle (45˚).
Turning the Device On/Off 1. Plug the connected power cord into a power outlet. 2. Press the Power button to turn on the monitor. 3. To turn the monitor off, press the Power button again. NOTE: The monitor will still consume some power as long as the power cord is connected to the power outlet. If the monitor is not being used for a long period of time, please disconnect the power plug from the power outlet.
Using the Control Panel Keys Use the control panel keys to access the Quick Access Menu, navigate the OnScreen Display (OSD) Menu, and change the settings. Quick Access Key Joy Key Quick Access Function Press the Quick Access Key to activate the Quick Access function. To learn more, see page 47.
Hot Keys When the On-Screen Display (OSD) Menu is off, you can quickly access special functions by using the control panel keys. Key [◄] Description Press and hold the key for 5 seconds to lock/unlock the OSD Menu. When the menu appears on the screen, continue holding the key for 10 seconds to lock/unlock the OSD Menu.
Key [►]1 Description Press and hold the key for 5 seconds to lock/unlock the Power button. When the menu appears on the screen, continue holding the key for 10 seconds to lock/unlock the Power button. Locking Power Button Press and hold for 10s to lock Power If the Power button is locked, the below message will appear on the screen: Power Lock/Unlock Power Button Locked [▲] Press and hold the key for 5 seconds to display/hide the boot up screen when the device is turned on.
Configuring the Settings General Operations 1. Press the [●] key or move the joy key [◄] or [▲] or [▼] to display the On-Screen Display (OSD) Menu. X G 2 7 0 Q G Game Modes Display Input Select G-Sync ON Max. Refresh Rate 144 Hz Audio Adjust Custom 1 Game Modes Setup Menu HDMI DisplayPort Exit Navi. Power 2. Move the joy key [◄] or [►] to select the main menu. Then move the joy key [▼] to enter the selected menu. X G 2 7 0 Q G Game Modes Display Input Select G-Sync ON Max.
3. Move the joy key [▲] or [▼] to select the desired menu option. Then move the joy key [►] to enter the sub-menu. X G 2 7 0 Q G Game Modes Display Input Select Volume On Mute Off G-Sync ON Max. Refresh Rate 144 Hz Audio Adjust Exit Navi. Custom 1 Game Modes Setup Menu Power 4. Move the joy key [▲] or [▼] to adjust/select the setting. Then press the [●] key to confirm. X G 2 7 0 Q G Game Modes Display Input Select Volume On Mute Off G-Sync ON Max.
NOTE: Certain menu option adjustments do not require the user to press the [●] key to confirm the selection. X G 2 7 0 Q G Game Modes Display Input Select G-Sync ON Max. Refresh Rate 144 Hz Audio Adjust Custom 1 Game Modes X G 2 7 0 Q G Setup Menu Game Modes Volume On Volume Mute Off Mute Display Input Select G-Sync ON Max. Refresh Rate 144 Hz Audio Adjust Custom 1 Game Modes Setup Menu 50 /100 Exit Navi. Power Exit Key Guide Navi. Power Key Guide 5.
On-Screen Display (OSD) Menu Tree Main Menu Sub-menu Menu Option Gaming Modes Standard ULMB Off On ULMB Pulse Width (-/+) Dark Boost Level 1 Level 2 Level 3 Off Adaptive Contrast On Off Blue Light Filter (-/+, 0~100) Response Time OD Standard Advanced Ultra Fast Recall Custom 1 / 2 ULMB Off On ULMB Pulse Width (-/+) Dark Boost Level 1 Level 2 Level 3 Off Adaptive Contrast On Off Blue Light Filter (-/+, 0~100) Response Time OD Standard Advanced Ultra Fast Recall FPS Battle Royal
Main Menu Sub-menu Menu Option Display OverClocking 165Hz Native Contrast (-/+, 0~100) Brightness (-/+, 0~100) Saturation (-/+, 0~200) 6-Axis Color Red (-/+, 0~255) Green (-/+, 0~255) Blue (-/+, 0~255) Cyan (-/+, 0~255) Magenta (-/+, 0~255) Yellow (-/+, 0~255) Color Temperature sRGB Bluish Native Warm User Color Input Range Auto Full Range Limited Range Gamma 1.8 2.0 2.2 2.4 2.
Main Menu Sub-menu Menu Option Audio Adjust Volume (-/+, 0~100) Mute On Off Setup Menu Language English Français Deutsch Español Italiano Suomi Русский Türkçe 日本語 한국어 繁體中文 简体中文 Česká Svenska Resolution Notice Off On Information Quick Access Blue Light Filter On/Off ULMB On/Off Standard On/Off Custom 1 On/Off Custom 2 On/Off FPS On/Off Battle Royale On/Off MOBA On/Off Console On/Off 34
Main Menu Sub-menu Menu Option Setup Menu Crosshair Type Type A Type B Type C Color Green White Yellow Reset Off Elite RGB Rear Rainbow Breathing Stack Others Base Rainbow Breathing Stack Others Always On On Off Reset On Off OSD Timeout 5/15/30/60 OSD Background On Off 35
Main Menu Sub-menu Menu Option Setup Menu Power Indicator On Off Standby Charger On Off Sleep 30 Minutes 45 Minutes 60 Minutes 120 Minutes Off Deep Sleep HDMI Deep Sleep On Off DisplayPort Deep Sleep ECO Mode Standard Optimize Conserve Memory Recall 36 On Off
Menu Options Game Modes 1. Press the [●] key or move the joy key [◄] or [▲] or [▼] to display the On-Screen Display (OSD) Menu. 2. Move the joy key [◄] or [►] to select Game Modes. Then move the joy key [▼] to enter the Game Modes menu. X G 2 7 0 Q G Game Modes Display Input Select G-Sync ON Max. Refresh Rate 144 Hz Audio Adjust Custom 1 Game Modes Setup Menu Standard Custom 1 Custom 2 FPS Battle Royale MOBA Exit Navi. Power 3. Move the joy key [▲] or [▼] to select the setting.
Display 1. Press the [●] key or move the joy key [◄] or [▲] or [▼] to display the On-Screen Display (OSD) Menu. 2. Move the joy key [◄] or [►] to select Display. Then move the joy key [▼] to enter the Display menu. X G 2 7 0 Q G Game Modes Display Input Select G-Sync ON Max. Refresh Rate 144 Hz Audio Adjust Custom 1 Game Modes Setup Menu OverClocking Contrast Brightness Saturation 6-Axis Color Color Temperature Exit Navi. Power 3. Move the joy key [▲] or [▼] to select the menu option.
Menu Option Description Color Temperature Select the color temperature setting. • sRGB: Lower brightness and more natural colors. • Bluish: Set the color temperature to 9300K. • Native: Default color temperature. Recommended for regular use. • Warm: Set the color temperature to 5000K. • User Color: Adjust red, green, and blue values as desired. Input Range The monitor can detect the input signal color range automatically.
Input Select 1. Press the [●] key or move the joy key [◄] or [▲] or [▼] to display the On-Screen Display (OSD) Menu. 2. Move the joy key [◄] or [►] to select Input Select. Then move the joy key [▼] to enter the Input Select menu. X G 2 7 0 Q G Game Modes Display Input Select G-Sync ON Max. Refresh Rate 144 Hz Audio Adjust Custom 1 Game Modes Setup Menu HDMI DisplayPort Exit Navi. Power 3. Move the joy key [▲] or [▼] to select the desired input source.
Audio Adjust 1. Press the [●] key or move the joy key [◄] or [▲] or [▼] to display the On-Screen Display (OSD) Menu. 2. Move the joy key [◄] or [►] to select Audio Adjust. Then move the joy key [▼] to enter the Audio Adjust menu. X G 2 7 0 Q G Game Modes Display Input Select G-Sync ON Max. Refresh Rate 144 Hz Audio Adjust Custom 1 Game Modes Setup Menu Volume Mute Exit Navi. Power 3. Move the joy key [▲] or [▼] to select the desired option. Then move the joy key [►] to enter its sub-menu. 4.
Setup Menu 1. Press the [●] key or move the joy key [◄] or [▲] or [▼] to display the On-Screen Display (OSD) Menu. 2. Move the joy key [◄] or [►] to select Setup Menu. Then move the joy key [▼] to enter the Setup Menu menu. X G 2 7 0 Q G Game Modes Display Input Select G-Sync ON Max. Refresh Rate 144 Hz Audio Adjust Custom 1 Game Modes Setup Menu Language Select Resolution Notice Information Quick Access Crosshair Elite RGB Exit Navi. Power 3.
Menu Option Description Language Select Select an available language for the OSD Menu. Resolution Notice Enable this option to allow the system to inform users that the current viewing resolution is not the correct native resolution. Information Display the monitor information. Quick Access Select which options to have present in the Quick Access Menu. Crosshair Aim more clearly and quickly during FPS games with the on-screen overlay. For more, see page 49.
Menu Option OSD Timeout OSD Background Power Indicator Standby Charger Sleep Deep Sleep ECO Mode Memory Recall Description Adjust the length of time the OSD Menu remains on screen. Show/Hide the OSD background when the OSD Menu appears on the screen. Set the Power Indicator On or Off. If the setting is set to On, the power indicator lights blue when the device is turned on. When activated, the USB will continue to supply power even when the monitor is in standby mode.
Advanced Features and Settings This section describes advanced features of the monitor. Blue Light Filter and Eye Health The Blue Light Filter blocks high-energy blue light for a more comfortable viewing experience. Quick Access Blue Light Filter Setup Enabling and disabling the Blue Light Filter can be done on the fly via the Quick Access Key.
While using and enjoying your monitor please keep the following in mind: • Viewing computer screens for extended periods of time may cause eye irritation and discomfort. To reduce these effects, it is recommended to take periodic breaks from viewing to allow the eyes to relax. • Users can customize the Blue Light Filter value through the Game Modes Menu. X G 2 7 0 Q G Game Modes Display Input Select G-Sync ON Max.
Quick Access Quickly initiate some functions and modes through the Quick Access key and function. Users can also define which functions or modes they prefer in the Quick Access Menu via the Setup Menu in OSD. The function/mode will be enabled as soon as the Quick Access Key is pressed. Quick Access Quick Access Blue Light Filter Blue Light Filter On Off NOTE: • The Quick Access Menu will disappear after three (3) seconds automatically. To Change the Quick Access function for the Quick Access Key: 1.
Elite RGB Lighting This setting controls the RGB lighting on the back of the monitor and beneath the bezel. When “On”, or after being reset, the default ‘Breathing’ mode will be active. To enter the Elite RGB menu: 1. Press the [●] key or move the joy key [◄] or [▲] or [▼] to display the On-Screen Display (OSD) Menu. 2. Move the joy key [◄] or [►] to select Setup Menu. Then move the joy key [▼] to enter the Setup Menu menu. 3. Move the joy key [▲] or [▼] to select Elite RGB.
Crosshair Select from different crosshair styles and colors to overlay on your screen. To enable the Crosshair function: 1. Press the [●] key or move the joy key [◄] or [▲] or [▼] to display the On-Screen Display (OSD) Menu. 2. Move the joy key [◄] or [►] to select Setup Menu. Then move the joy key [▼] to enter the Setup Menu menu. 3. Move the joy key [▲] or [▼] to select Crosshair. Then move the joy key [►] to confirm the selection. 4.
Appendix Specifications Item Category Specifications LCD Type TFT, Active Matrix 1920 x 1080 LCD, 0.2331 mm x 0.2331 mm pixel pitch Display Size 68.
Item Category Specifications Power saving modes On3 60W (Typical) 4 Off < 0.5W (Max) 1 Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display. Please use the power adapter from ViewSonic® or an authorized source only. 3 The test condition follows EEI standards. 4 Without USB and audio.
Glossary This section describes the standard glossary of terms used in all LCD display models. All terms are listed in alphabetical order. NOTE: Some terms may not be applicable to your monitor. A Adaptive Contrast Management Brightness will adjust with on-screen content. Audio Adjust Adjusts the volume, mutes the sound, or toggles between inputs if you have more than one source. Auto Detect If the current input source has no signal, the monitor will automatically switch to the next input option.
C Color Temperature Allows users to select specific color temperature settings to further customize their viewing experience. Panel Default sRGB Bluish Native Warm Panel Original Status Standard color space used for the Windows system. Set the color temperature to 9300K. Default color temperature. Recommended for general use. Set the color temperature to 5000K. Contrast Adjusts the difference between the image background (black level) and the foreground (white level).
I Information Displays the timing mode (video signal input) coming from the graphics card in the computer, the LCD model number, the serial number, and the ViewSonic® website URL. See your graphics card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency). NOTE: VESA 1024 x 768 @ 60Hz, for example, means that the resolution is 1024 x 768 and the refresh rate is 60Hz. Input Range The monitor can detect the input signal color range automatically.
Q Quick Access Quickly initiate some functions and modes through the Quick Access key and menu. Users can also define which functions or modes they prefer in the Quick Access Menu via the Setup Menu in OSD. R Recall Resets the Game Mode monitor settings. Resolution Notice The notice tells users that the current viewing resolution is not the correct native resolution. This notice will appear in the display settings window when setting up the display resolution.
Troubleshooting This section describes some common problems that you may experience when using the monitor. Problem or Issue Possible Solutions No power • Make sure you have turned on the monitor by pressing the Power button. • Make sure the power cord is properly and securely connected to the monitor and power outlet. • Plug another electrical device into the power outlet to verify that the outlet is supplying power.
Problem or Issue Possible Solutions The screen isn’t centered correctly • Adjust the horizontal and vertical controls via the OSD Menu. • Check the Aspect Ratio. • Reset the monitor to factory settings. The screen appears yellow • Make sure the “Blue Light Filter” is Off. The OSD Menu does not appear on the screen/the OSD controls are inaccessible • Check whether the OSD Menu is locked. • Turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor.
Maintenance General Precautions • Make sure the monitor is turned off and the power cable is unplugged from the power outlet. • Never spray or pour any liquid directly onto the screen or case. • Handle the monitor with care, as a darker-colored monitor, if scuffed, may show marks more clearly than a lighter-colored monitor. Cleaning the Screen • Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
Regulatory and Service Information Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit. FCC Compliance Statement This device complies with part 15 of FCC Rules.
The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
Indian Restriction of Hazardous Substances Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Copyright Information Copyright© ViewSonic® Corporation, 2019. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic® Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
Customer Service For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product’s serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/ 中国 (China) www.viewsonic.com.cn 香港 (繁體中文) www.viewsonic.com/hk/ Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/ Indonesia www.viewsonic.com/id/ Israel www.viewsonic.
Limited Warranty ViewSonic® Display What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, and as your sole remedy, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
• Causes external to the product, such as electric power fluctuations or failure. • Use of supplies or parts not meeting ViewSonic’s specifications. • Failure of owner to perform periodic product maintenance as stated in the User Guide. • Any other cause which does not relate to a product defect. • Damage caused by static (non-moving) images displayed for lengthy periods of time (also referred to as image burn-in). • Software - Any third-party software included with the product or installed by the customer.
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: • Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
Mexico Limited Warranty ViewSonic® Display What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components & accessories.
How to get service: For information about receiving service under warranty, contact ViewSonic® Customer Support (Please refer to the attached “Customer Service” page). You will need to provide your product’s serial number, so please record the product information in the space provided below on your purchase for your future use. Please retain your receipt of proof of purchase to support your warranty claim.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col. Bugambilias C.
Process Color C0 M91 Y72 K24 Process Color C0 M0 Y0 K100 Process Color C0 M91 Y72 K24 Spot Color Pantone Black C Spot Color Pantone 187 C
