Instruction manual

FRONT & BACK KEY CONTROL

1. MOTION DETECTION

Built-in camera sensor for the Motion detection function.

2. BUILT-IN CAMERA

Image of this camera is shown by HDMI.

3. IR Sensor

Remote controller sensor.

4. POWER LED

The power LED lights with green when the power is turned ON.

The power is turned off by pressing the power switch again and the power LED goes to off.

5. RECORDING INDICATOR LED

This LED indicates the recording status by blinking the LED light.

User can choose the LED colors among these. (Red, Blue, Purple)

6 & 7. ▶(+) & ◀(-)

Adjust menu settings.

8 & 9. ▼ & ▲

These buttons allow user to enter the sub-menu of the activated function.

The up(▲) button is HOLD function and stop the Motion Detection & Auto switching functions.

10. SOURCE/SELECT

Selects an input source.

Enters a submenu or accepts your selection in the OSD menu.

11. MENU/EXIT

Activates and exits the On Screen Display.

This button can also be used to move previous menu or status.

12. POWER ON/OFF( / I )

Turns the power ON or OFF. There will be a few seconds delay before the display appears.

- 9 -