Instruction manual

Setting up the menu
Settings can be made using the OSD Switch located on the back of
the camera.
1. Press the button to access the SETUP mode.
The SETUP menu is displayed on the monitor.
2. Please select any function you wish to activate by using the
UP/DOWN selections. The cursor can be moved up or down by
using the UP/DOWN selections.
Position the cursor to point to the function you wish to operate.
* MAIN-menu: Use UP/ DOWN selections. / SUB-menu: Use LEFT/ RIGHT selection
3. Change the status of the selected feature using the LEFT/RIGHT selections.
When the LEFT or RIGHT selection is done, available values and modes are displayed in order.
Please keep the selection until you get to the mode you wish to operate.
4. When completed, move the cursor indicator to „EXIT‟ position and press the Button to finish the
setting.
1.SET UP MENU
1-1. LENS
(1) Manual Mode
- The level of brightness of a screen is automatically
controlled using the Electronic Shutter, AGC and Sens-up.
(2) DC IRIS Mode
- DC IRIS, AGC, and Sense-Up are used to automatically
control the brightness level of a screen.
(3) Video IRIS Mode
- VIDEO IRIS, AGC and Sense-Up are used to automatically
control the brightness level of a screen.
- 19 -