Instruction manual

1-2. EXPOSURE
(1) SHUTTER
- Shutter speed control
(AUTO&FLK level: 1/60~1/100000/X2~X60)
(2) AGC (Auto Gain Control)
The higher the gain level is, the brighter the screen becomes.
But the higher gain level causes more noise.
- LOW: Allows automatic gain control from 0 to 20dB.
- MIDDLE: Allows automatic gain control from 0 to 30dB.
- HIGH: Allows automatic gain control from 0 to 42dB.
- OFF
(3) SENS-UP
- The Sens-up function allows the camera can display the bright image even extreme darkness.
Important Tips: IR Distance can be extended twice longer when <Sens-up> is set x2 ~ x6.
Caution: When Sens-up is adjusted for more than 8 times (x8), the picture becomes brighter but
the frame rate relatively gets slower resulting and the picture becomes slow motioned.
(4) BRIGHTNESS
- Adjusts the brightness in 5~100
(5) D-WDR
- D-WDR (Digital-Wide Dynamic Range) block performs an image enhancement processing to
enhance visibility of an image by changing the brightness values to the level that people can
recognize the change.
- 20 -