Instruction manual

1-3. WHITE BAL
(1) MANUAL
- In the manual mode, the user can choose the color and
temperature. The user can adjust the color and temperature
by controlling red and blue gain.
(2) AWC→SET
- This is used in order not to change the color and temperature
values set for a certain environment. Press for two to three
seconds the “Set Button” on the OSD MENU in order to have
the color and temperature values fixed. When the value of
OPD Block is included in ATW Area, color and temperature
are fixed for that relevant value only. If there is no such value
included, the color and temperature are fixed for the entire
image.
(3) ATW
- Auto tracking white balance. In certain light conditions the
colors are adjusted automatically.
(4) INDOOR: Use this mode when color temp. is between 4,500k~8,500k.
(5) OUTDOOR: Use this mode when color temp. is between 1,800k~10,500k (Sodium light included).
- 22 -