Instruction manual

100
Recommended Tips for System Setup - Appendix #5
Screen Saver Settings
The screen saver will black the screen during a defined interval.
1. Enter MENU mode by pressing the MENU
button on the front panel of the system,
Remote Control or Mouse Menu. Select
the SYSTEM SETUP Option.
2. Select the DISPLAY menu from the MAIN
menu. Navigate using the up and down
arrows on the front panel (or remote
control). Highlight the selection in Green,
and press the ENTER button to enter the
DISPLAY Menu.
3. Select the SCREENSAVER Menu.
Change the settings by navigating with
the UP/DOWN/LEFT and RIGHT arrow
keys. Set the screen saver options:
• Auto Brightness - Sets the length of
time before the Screen brightness is
turned down (up to # minutes).
NOTE: The unit continues to function, and
pressing any key will turn the screen back
on.
• Main Display OFF - Turns the Main
Display Screen ON/OFF/TIMED:
z ON - The Main Display is always ON
z OFF - The Main Display is always OFF
• FROM - Used ONLY when the Main Display OFF setting is set to ON. Sets the Start
Time for the monitor to go into Screen Saver mode.
• TO - Used ONLY when the Main Display OFF setting is set to ON. Sets the End Time
for the monitor to exit from Screen Saver mode.