Instruction manual

42
System Menu
System Information Screen
• IP Address - Displays the IP address
assigned to the System.
• MAC Address - Displays the unique
MAC address assigned to the unit. This
address is hard coded to the unit and
cannot be changed.
• Disk Capacity - Displays the Total Hard
Drive space, and the amount of Hard
Drive in use.
• F/W Version - Displays the Firmware
and Hardware version numbers.
• Video Signal Type - Indicates the Video
Signal Type as either NTSC or PAL
(depending on Region).
• DDNS Domain Name - The name setup
when the online DDNS registration was
created.
• Net Client and Web Ports - Displays
the ports for remote connection.
Firmware Update
New firmware is periodically available for
download from the www.lorexcctv.com
website.
SYSTEM MANAGEMENT
• System Information - Navigate to the
PRESS button, and choose ENTER to
display the System Information.
To display the System Information from the
main Channel view screen, press the
ENTER Key on the front Panel -or- Press
the INFO button on the Remote Control.
• System Name - Input a name for the
system using the Virtual Keyboard.
• FW Update - Navigate to the PRESS
button, and choose ENTER to update
the System Firmware.
• Factory Default - Navigate to the
PRESS button, and choose ENTER to
reset the System to Factory Defaults.
• System Data - Saves or Loads the
System Data (system settings).
• Password - Turns the system password
ON/OFF (when logging into the Menu
Setup and Search Menus).
System Information Screen
Displays the System Information. The IP
address and MAC address are necessary
for setting up the DDNS Server.