Instruction manual

81
Setting up Remote Viewing - Appendix #3
System - IP & MAC Address
The IP & MAC Addresses are necessary
for DDNS Setup (for remote access to
the System).
To Locate the System information, Press
the ENTER button on the Front Panel or
Info on the Remote Control while viewing
the Cameras. The System Info window
will be displayed.
- OR -
1. Press the Menu Button on the Front
Panel or Remote Control, or right click
with the mouse to access the Setup
Menu. Select the System Setup option
and press the Enter button.
2. Navigate to the System Menu option.
Press the Enter button to access the
System Menu.
3. Navigate to the System Management
menu, and press the Enter Button to
access the settings.
4. Select the System Information option,
and press the Enter Button to display
the System Settings.
IP Address
MAC Address
IP Address
MAC Address
NOTE: Your IP address should look similar to 192.168.0.105, 10.0.0.105, etc. If your IP address
is showing as 127.0.0.1, please review all menu settings, and check to make sure that your
Ethernet cable is properly connected to your Router and System.