Instruction manual

Recommended Tips for System Setup - Appendix #5

Camera Setup

Each camera should be assigned a name that corresponds to its use (i.e. Dock1, BackDoor,

Cash3, etc.). This name is displayed onscreen, and helps to identify the camera location easily.

1. Enter MENU mode by pressing the MENU

button on the front panel of the system,

Remote Control or mouse menu. Select

the SYSTEM SETUP Option.

2. Select the CAMERA menu from the MAIN

menu. Navigate using the up and down

arrows on the front panel (or remote

control). Highlight the selection in Green,

and press the ENTER button to enter the

CAMERA Menu.

3. Select the CAMERA TITLE Menu.

Change the settings by navigating with

the UP/DOWN/LEFT and RIGHT arrow

keys.

• CAM # - Indicates the Camera Number

(corresponds to the DIN/BNC

connection port on the back of the

system).

• Covert - Turns the onscreen display of

the Camera ON/OFF. Covert Cameras

continue to record, however the

camera is not displayed onscreen.

This feature is commonly used in

situations where the Monitor is located

in a public area, and a camera should

not be displayed (i.e. Located in a Cash

Count room, or directed at a Cash

• Title - Sets the name for the individual

camera (0~9, A~Z) up to # characters,

by using the Virtual Keyboard:

z Virtual Keyboard - Appears when the

Camera Title change is selected. Navigate

with the arrow keys, and press ENTER to

select a Number or Letter.

z APPLY - Saves the Title change.

z PREVIOUS - Moves to the previous

camera in the list