User Manual

Hybrid Digital Video Recorder
User Manual 4 Camera Management
16 Issue V1.0 (2016-12-22)
4.4 Alarm Setup
The system allows you to set alarm types for cameras of channels in Alarm Setup.
Operation Description
Click Menu in the upper left corner of the camera management screen and choose
Alarm Setup to access the Alarm Setup screen, as shown in Figure 4-5.
Figure 4-5 Alarm Setup screen
The alarm setup parameters are described as follows:
Motion: An alarm is triggered when an image in a specified area changes.
Tamper: An alarm is triggered when the lens of a camera is covered.
Disconnected: An alarm is triggered when a camera is disconnected from the HDVR.
Operation Steps
Step 1 Select a camera in the camera list on the left side of the Alarm Setup screen.
Step 2 Click buttons next to Static, Motion, Tamper, and Disconnected to enable or
disable the alarm function according to alarm requirements.
Step 3 Click OK to save alarm settings or click Apply to all to apply the parameter
settings to cameras of all channels.
----End