User Manual

Hybrid Digital Video Recorder
User Manual 5 Setting
24 Issue V1.0 (2016-12-22)
5.4 Privacy
5.4.1 Protect
Operation Steps
Step 1 On the Setting screen, choose Privacy to access the privacy setting screen, as
shown in Figure 5-6.
Figure 5-6 Privacy setting screen
Step 2 Click Protect.
1. Click the button next to Only LAN to enable or disable the only LAN access
function. The function is disabled by default.
2. Click the button next to Need Password to enable or disable the password function.
The function is enabled by default.
3. After Need Password is set to On, you can set an email address for retrieving the
password.
Enter an email address and click Check. A prompt, indicating that the verification code
has been sent to your email address, is displayed. Check your email, find the
verification code, enter the verification code on the privacy setting screen, and click
Submit. The password is set successfully if a setting success prompt is displayed.
Step 3 Click OK to save system protection settings or click Cancel to cancel settings.