User Manual

2 Basic Operations
Hybrid Digital Video Recorder
User Manual
Issue V1.0 (2016-12-22) 3
2 Basic Operations
Powering on the Device
z
Ensure that the HDVR is correctly connected to a power supply, and a display is
correctly connected to the high definition multimedia interface (HDMI) or video
graphics array (VGA) port of the HDVR before power-on.
z
In some environments, abnormal power supply may cause the failure of the HDVR
to work properly and even damage the HDVR in severe cases. It is recommended
to use a regulated power supply to power the HDVR in such environments.
After the HDVR is connected to a power supply, the power indicator is steadily on.
Start the HDVR. The real-time video screen is displayed, as shown in Figure 2-1.
Figure 2-1 Real-time video screen
Users need to provide a hard disk for the HDVR. The hard disk is strictly detected during
device startup. If the detection result failed, the possible causes are as follows: