User Manual

4 Camera Management
Hybrid Digital Video Recorder
User Manual
Issue V1.0 (2016-12-22) 13
Operation Steps
Step 1 Select a network camera to be bound in the camera list on the right side. The real-
time video and basic information of the network camera are displayed on the left
side.
Step 2 Click the button next to Bind below the play window. The button turns blue and
the binding status is changed to
in the camera list on the right side, indicating
that the camera is bound successfully.
z
Analog addresses directly connected to the HDVR are bound preferentially and are
assigned the IP address 127.0.0.1. When channels of the HDVR are insufficient for the
access of analog cameras, they automatically occupy the channels of network cameras.
z
If all channels of the HDVR are bound to cameras, you need to unbind cameras that do
not need to be bound.
z
You can choose Click Add to automatically add cameras of all channels.
z
If a network camera is added, enter the username and password of the camera below the
play window. The video of the camera can be viewed only after successful login.
4.1.2 Unbinding a Camera
Operation Steps
Step 1 Select a camera to be unbound in the camera list on the right side. Information
about the camera is displayed below the play window.
Step 2 Click the button next to Bind below the play window. The button turns white and
the binding status is changed to
in the camera list on the right side,
indicating that the camera is unbound successfully.
If you click Clear, a message as shown in Figure 4-2 is displayed. Click OK to unbind
network cameras of all channels of the HDVR.
Figure 4-2 Unbinding confirmation message