User Manual

Hybrid Digital Video Recorder
User Manual 5 Setting
20 Issue V1.0 (2016-12-22)
Step 4 Click Restore Defaults to restore current settings to factory defaults.
Step 5 Click OK to save system settings or click Cancel to cancel settings.
After you click Restore Defaults and save the settings, the HDVR will restart.
----End
5.1.2 Time
Operation Steps
Step 1 On the Setting screen, choose Basic > Time to access the time setting screen, as
shown in Figure 5-2.
Figure 5-2 Time setting screen
Step 1 Select a required time zone from the Time Zone drop-down list.
Step 2 Select a required date format from the Date Format drop-down list.
Step 3 Click the button next to 24 Hour to disable the 24-hour system. Then, the 12-hour
system is enabled. If 24 Hour is set to On, the 24-hour system is used and is
enabled by default.
Step 4 Click the button next to Sync Time to disable time synchronization. Time
synchronization is enabled by default. Time is synchronized with the PC time.
Step 5 After Sync Time is disabled, you can manually set the system time:
Click Date and scroll the mouse scroll wheel to select the year, month, and date.
1. Click Time and scroll the mouse scroll wheel to select the hour, minute, and
second.