5-INCH RACK TFT-LCD MONITOR USER MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
………………………………………………………….…… 2~3 …………………………………………………………….......................... 4 ……………………………....................... 5 CONNECTING WITH EXTERNAL EQUIPMENT …………………………………… 6 REMOTE FUNCTIONS ………………………………………………………………… 7 ……………………………………………………….. 8 ~ 12 MOUNTING GUIDE …………………………………………………………………….. 13 ………………………………………… 14 ……………………………………………………………… 15 ……………………………………………………………………… 16 TROUBLE SHOOTING GUIDE ………………………………………………….........
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. - Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
A. BOTTOM PANEL CONTROL 1 2 3 4 5 6 7 8 9 1. PC STEREO IN 2. S-VIDEO (Y/C) OUT Y/C separated signal looping output 3. S-VIDEO (Y/C) IN Y/C separated signal input 4. AUDIO L Stereo Audio Signal Input, This input is for AV2 5. AUDIO R Stereo Audio Signal Input, This input is for AV1,S-VIDEO 6. VIDEO 2(AV2) OUT Video looping output for AV2 7. VIDEO 2(AV2) IN Composite signal Input for AV2 8. VIDEO 1(AV1) OUT Video looping output for AV1 9. VIDEO 1(AV1) IN Composite signal Input for AV1 10.
B. REMOTE CONTROLLER(Optional) 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Selects an input source. 3. APC (Auto Picture Control) Selects a picture mode. 4. ACC (Auto Color Control) Selects a color mode. 5. AV1 Select AV1 mode 6. AV2 Select AV2 mode 7. S-VIDEO Select S-VODEO mode 8. PC Select PC mode 9. AUTO Auto geometry adjustment in PC Source. 10. MUTE Mutes the sound. 11. MENU Activates and exits the On Screen Display. 12.
C. FRONT & BOTTOM KEY CONTROL 1 2 3 4 5 6 7 8 9 1, 2. VOL Adjust menu settings. / Adjust the volume 3, 4. ▼ ▲ This button allows user to enter the sub-menu of the activated function when down key is pressed on the main menu. 5. SOURCE / SELECT Select input source, and move the previous menu. 6. MENU / EXIT Activates and exits the On Screen Display. This button can also be used to move previous menu or status. OSD MENU (MAIN) : Input Source, Screen, Audio, OSD, Color, Utility, Exit. 7.
OSD MENU DESCRIPTION All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. (On Screen Display) To adjust the OSD screen: 1. Press the Menu button to enter the OSD menu. 2. Press the ▲/▼ buttons to select the desired option. The selected option is highlighted. 3. Press the ▶ button to enter the submenu for adjusting items. 4. Change the value you wish to adjust by using the ▲/▼ buttons. 5. Press the ◀ button to exit the submenu for adjusting items. 6.
B. Picture/Sound < AV1, AV2 & S-Video > Option < PC > Function Value Picture Mode Sets picture mode. See table below. Color Tone Sets color tone. See table below. Mute Mutes speaker sound. Off or On. Volume Adjust the level of audio volume. 0 ~ 100. Size Inactivated. PC 1) See table below. 1) Unavailable in AV 1, AV2 & S-Video inputs. Picture Mode (In AV1, AV2 & S-Video inputs) Custom Applies user selected values (Brightness, Contrast, Tint and Sharpness).
Color Tone Custom 1) To manually adjust the color tones(Red, Green and Blue). Cool Gives the white color a bluish tint. Normal Gives the white color a neutral tint. Warm Gives the white color a reddish tint. 1) Unavailable in AV1, AV2 & S-Video. PC Option Function Value Auto Adjust Auto geometry adjustment. Phase Adjusts the number of horizontal picture elements. 0 ~ 100. H-Position Adjusts the horizontally picture position. 0 ~ 100. V-Position Adjusts the vertically picture position.
C. Setup Option Reset Function Value Resets the monitor settings to their factory default. English, French, Deutsch, Language Sets the language of the OSD menu. Italian, Spanish, Portuguese or Nederland. OSD Tone Blue Screen Key Lock1) Changes background of monitor menus (e.g. input source & information). Displays a blue screen if the monitor receives no signal. Locks all buttons of the monitor. Note: Use remote controller to unlock. Transparency or Blue. Off or On. Off or On.
Wall mountable using two methods: 1) Using the both sides pre-cut holes to rack mounting. 2) Using the VESA standard wall mount design and the 100mm holes pattern on the back panel to install the LCD monitor to the wall.
▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND D-SUB ▶ ACCESSORIES 1. POWER CORD 2. USER’S MANUAL 3. PC cable 4. Adaptor 5. Remote Control 6. Batteries 7. Wall mount (Option) 8.
POWER CONSUMPTION MODE POWER CONSUMPTION ON < 36W STANDBY < 5W SUSPEND < 5W ACTIVE OFF < 5W LED INDICATOR The power management feature of the monitor is comprised of four stages: On(Green), Standby, Suspend, Active off(Red on/off 1 sec) and Unsupported mode(Green). MODE LED COLOR ON GREEN STANDBY SUSPEND MODE POWER OFF Normal Operation Screen blanks after preset idle time AMBER And some electronic circuits or all Circuitry in the monitor shut down.
15" 15˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch (mm): 0.297(H) x 0.297(V) LCD-Type BRIGHTNESS: 225cd/㎡(Typical) CONTRAST RATIO: 600:1(Typical) RESPONSE TIME: 8ms(Typical) RESOLUTION (H x V) FREQUENCY 1024x768@60Hz HORIZONTAL: 31~48kHz VERTICAL: 56~75Hz VGA(RGB-PC) VIDEO (2ch input 1.0Vp-p, 75Ω terminated, loop-through out) INPUT SIGNAL S-VIDEO(1ch input (Y/C), loop-through out) AV(composite) Sound in PC Stereo Sound ACTIVE DISPLAY AREA (W x H) 304.1mm x 228.
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO
MEMO
MEMO
P/N : L39ME0102_Rev.
