7/19-INCH VALUE TFT-LCD MONITOR INSTRUCTION MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
………………………………………………………………….. 2~3 ……………………………………………………………….......................... 4 ……………………………........................... 5 SAFETY INSTRUCTION CAUTIONS FCC RF INTERFERENCE STATEMENT CONNECTING WITH EXTERNAL EQUIPMENT ………………………………………. 6 …………………………………………………………………… 7 ………………………………………………………….. 8 ~ 17 MOUNTING GUIDE ……………………………………………………………………….. 18 ……………………………………………. 19 …………………………………………………………………. 20 SPECIFICATIONS …………………………………………………………………………. 21 …………………………………………………………...
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. - Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING - To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
A. BOTTOM PANEL CONTROL 1. DC 12V IN 2. D-SUB IN PC Signal Input 3. VIDEO 1(AV1) IN Composite signal Input for AV1 4. VIDEO 1(AV1) OUT Video looping output for AV1 5. VIDEO 2(AV2) IN Composite signal Input for AV2 6. VIDEO 2(AV2) OUT Video looping output for AV2 7, 8. AUDIO IN (L+R) Stereo Audio Signal Input for AV1 & AV2. 9. PC STEREO IN 6 …………………………………………………………………….
B. REMOTE CONTROLLER (Option) 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video( AV1 / AV2 / PC ) sources. 3. APC (Auto Picture Control) Select picture mode. 4. ACC (Auto Colour Control) Select Colour mode. 5. AV1 Select AV1 mode. 6. AV2 Select AV2 mode. 7. S-VIDEO Not operating. 8. PC Select PC mode 9. AUTO Auto geometry adjustment in PC Source. 10. MUTE Mute the sound. 11. MENU Activates and exits the On Screen Display. 12.
C. FRONT KEY CONTROL 1. SOURCE / Select input source, and move the previous menu. 2. MENU Activates and exits the On Screen Display. This button can also be used to move previous menu or status. 3, 4. AUTO/▼, ▲ These buttons allow user to move the sub-menu of the activated function. AUTO/▼ : Auto geometry adjustment 5 / 6. ◀ VOL ▶ Adjust the volume and menu settings. 7. IR Sensor Remote controller sensor. 8. POWER LED The power LED lights with green when the power is turned ON.
OSD MENU DESCRIPTION A: PICTURE MENU (for AV1 & AV2 input) 1) Press the MENU button. 2) Press the up(▲) or down(▼) button to select the PICTURE. 3) Press the up(▲) or down(▼) button to select the PICTURE sub menu. 4) Press the left(◀) or right(▶) button to adjust the sub menu setting. • CONTRAST: Increase or decrease the intensity(lightness or dimness) of the image. • BRIGHTNESS: Increase or decrease the intensity of the image. • HUE: Increase or decrease the hue of the picture.
B. SOUND MENU 1) Press the MENU button. 2) Press the up(▲) or down(▼) button to select the SOUND. 1. VOLUME 1) Press the right(▶) or enter button 2) Press the up(▲) or down(▼) button to select the Volume. 3) Press the left(◀) or right(▶) button to adjust the Volume. 10 …………………………………………………………………….
2. Mute 1) Press the up(▲) or down(▼) button to select the MUTE. 2) Press the left(◀) or right(▶) button to select the ON or OFF. INSTRUCTION MANUAL …………………………………………………………………….
C. PC MENU(for PC input) 1) Press the MENU button. 2) Press the up(▲) or down(▼) button to select the PC. 1. CONTRAST & BRIGHTNESS 1) Press the up(▲) or down(▼) button to select the CONTRAST and BRIGHTNESS. 2) Press the left(◀) or right(▶) button to adjust the CONTRAST and BRIGHTNESS Setting. 12 …………………………………………………………………….
2. H. POSITION, V. POSITION, CLOCK & PHASE 1) Press the up(▲) or down(▼) button to select the PC sub Menu. 2) Press the left(◀) or right(▶) button to adjust the PC image setting. • H. POSITION : Move image horizontally on screen right or left. • V. POSITION : Move image vertically on screen up or down. • CLOCK : Adjust the vertical noise of screen image. • PHASE : Adjust the number of horizontal picture elements. . INSTRUCTION MANUAL …………………………………………………………………….
3. COLOR MODE 1) Press the up(▲) or down(▼) button to select the COLOR MODE. 2) Press the right(▶) or enter button. 3-1. AUTO COLOR 1) Press the up(▲) or down(▼) button to select the AUTO COLOR. 2) Press the right(▶) or enter button. • AUTO COLOR : Auto color geometry adjustment. 14 …………………………………………………………………….
3-2. COLOR TEMP 1) Press the up(▲) or down(▼) button to select the COLOR TEMP. 2) Press left(◀) or right(▶) button to select the color temp mode. 3-3 COLOR TEMP - USER 1) Press left(◀) or right(▶) button to select the USER in the COLOR TEMP. 2) Press the up(▲) or down(▼) button to select the RED, GREEN and BLUE. 3) Press the left(◀) or right(▶) button to adjust the picture setting. INSTRUCTION MANUAL …………………………………………………………………….
D. SETUP MENU 1) Press the up(▲) or down(▼) button to select the SETUP. 2) Press the right(▶) or enter button. 1. LANGUAGE 1) Press the left(◀) or right(▶) button to select the OSD language. 16 …………………………………………………………………….
2. H. POSITION, V. POSITION, OSD TIMER, TRANSPARENT(for OSD control) 1) Press the up(▲) or down(▼) button to select the SETUP sub menu. 2) Press the left(◀) or right(▶) button to adjust the OSD Setting. • H. POSITION : Move OSD horizontally on screen right or left. • V. POSITION : Move OSD vertically on screen up or down. • OSD TIMER : Adjust the OSD displaying time. • TRANSPARENT : Adjust the OSD transparent. 3. RECALL 1) Press the right(▶) or enter button to select the RECALL menu.
Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation (Option) 1. The Monitor fixing bracket to the monitor using the fixing screws provided. 2. The monitor fixing bracket assembled with monitor ※ Attention! You must use four M4x10 screws to assemble this monitor and the wall mount bracket. 18 …………………………………………………………………….
▶ PIN ASSIGNMENTS Pin 1 ▶ RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ACCESSORIES 1. Power cord 2. Power adaptor 3. User’s manual 4. PC cable 5. Stereo cable (Option) 6. Remote controller (Option) 7. Batteries (Option) 8. Wall mount (Option) 9. Rack mount (Option) INSTRUCTION MANUAL …………………………………………………………………….
This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system.
17’’ LCD-Type RESOLUTION (H x V) FREQUENCY 19’’ 17˝ Diagonal AM-TFT(Active-Matrix) 19˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.264(H) x 0.264(V) Pixel pitch(mm) : 0.294(H) x 0.294(V) BRIGHTNESS: 250cd/㎡(Typical) BRIGHTNESS: 250cd/㎡(Typical) CONTRAST RATIO: 1000:1(Typical) CONTRAST RATIO: 800:1(Typical) RESPONSE TIME: 5msec(Typical) RESPONSE TIME: 5msec(Typical) 1280X1024 @60Hz HORIZONTAL: 31~64KHz VERTICAL: 50~75Hz VIDEO(2ch input 1.
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO
MEMO
MEMO
P/N : L39ME0168 Rev.
