7/19-INCH TFT-LCD MONITOR INSTRUCTION MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
………………………………………………………………….. 2~3 ……………………………………………………………….......................... 4 ……………………………........................... 5 SAFETY INSTRUCTION CAUTIONS FCC RF INTERFERENCE STATEMENT CONNECTING WITH EXTERNAL EQUIPMENT ………………………………………. 6 …………………………………………………………………… 7 ………………………………………………………….. 8 ~ 11 MOUNTING GUIDE ……………………………………………………………………….. 12 ……………………………………………. 13 …………………………………………………………………. 14 SPECIFICATIONS …………………………………………………………………………. 15 …………………………………………………………...
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. - Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING - To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
A. BOTTOM PANEL CONTROL 1 2 3 4 1. DC12V 2. PC AUDIO 3. PC-RGB PC Analog(VGA) Input 4. DVI PC Digital Input 6 …………………………………………………………………….
B. REMOTE CONTROLLER (Option) 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video( AV1 / AV2 / PC ) sources. 3. APC (Auto Picture Control) Select picture mode. 4. ACC (Auto Colour Control) Select Colour mode. 5. AV1 Select AV1 mode. 6. AV2 Select AV2 mode. 7. S-VIDEO Not operating. 8. PC Select PC mode 9. AUTO Auto geometry adjustment in PC Source. 10. MUTE Mute the sound. 11. MENU Activates and exits the On Screen Display. 12.
C. FRONT KEY CONTROL 1 2 3 4 5 6 7 8 1. SOURCE / Select input source, and move the previous menu. 2. MENU Activates and exits the On Screen Display. This button can also be used to move previous menu or status. 3, 4. AUTO/▲, ▼ These buttons allow user to move the sub-menu of the activated function. AUTO/▲ : Auto geometry adjustment. ▼ : Audio mute on or off when disappeared OSD. 5/6. ◀ VOL ▶ Adjust the volume and menu settings. 7. IR Sensor Remote controller sensor.
1. SELF-TEST DISPLAY When there is no connection at PC, the On Screen Display will show for 3 seconds. POWER SAVING MODE 2. OSD MENU DESCRIPTION 2-1 AUTO ADJUST Adjust screen size when input is Analog(VGA). 2-2. SCREEN 1) BRIGHTNESS Increase or decrease the intensity of the image. 2) CONTRAST Increase or decrease the intensity (lightness or dimness) of the image 3) H.POSITION Move image horizontally on screen right or left. 4) V.POSITION BRIGHTNESS CONTRAST H.POSITION V.
2-3. COLOR 1) COLOR TEMP. Adjust color temperature to 9300, 6500, user. 2) RED Adjust red color for user. 3) GREEN Adjust green color for user. COLOR TEMP RED GREEN BLUE 4) BLUE Adjust blue color for user. 1280 X 1024 63.9kHz 60Hz 2-4. UTILITY 1) RECALL Return to the default settings programmed at the factory; default setting. 2) FULL AUTO Adjust color temperature and screen size. 3) INPUT SELECT Select the Analog(VGA) or Digital(DVI). 2-5. LANGUAGE The menu displays selected languages.
6. OSD 1) OSD TIMEOUT. Select the OSD display timing. 2) OSD H.POSITION Move the OSD position to right or left. 3) OSD V.POSITION Move the OSD position up or down. 4) OSD TRANSPARENCY Select the OSD background. 7. AUDIO 1) AUDIO VOLUME Adjust audio volume. 2) AUDIO MUTE Mute audio volume. OSD OSD OSD OSD TIMEOUT H.POSITION V.POSITION TRANSPARENCY 1280 X 1024 63.9kHz 60Hz AUDIO VOLUME AUDIO MUTE 1280 X 1024 63.9kHz 60Hz INSTRUCTION MANUAL …………………………………………………………………….
Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation (Option) 1. The Monitor fixing bracket to the monitor using the fixing screws provided. 2. The monitor fixing bracket assembled with monitor. ※ Attention! You must use four M4x10 screws to assemble this monitor and the wall mount bracket. 12 …………………………………………………………………….
▶ PIN ASSIGNMENTS Pin 1 ▶ RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ACCESSORIES 1. Power cord 2. Power adaptor 3. User’s manual 4. PC cable 5. DVI cable (Option) 6. Stereo cable (Option) 7. Remote controller (Option) 8. Batteries (Option) 9. Wall mount (Option) 10.
This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system.
” 19” 17˝ Diagonal AM-TFT(Active-Matrix) 19˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.264(H) x 0.264(V) Pixel pitch(mm) : 0.294(H) x 0.
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
P/N : L39ME0184 Rev.
