21.5-INCH D2iP IP OUTPUT MONITOR USER MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
………………………………………………………….…… 2~3 …………………………………………………………….......................... 4 ……………………………....................... 5 ………………………………………………………………………….. 6 SAFETY INSTRUCTION CAUTIONS FCC RF INTERFERENCE STATEMENT INSTALLATION CONNECTING WITH EXTERNAL EQUIPMENT …………………………………… 7 ……………………………………………………….. 8 ~ 11 MOUNTING GUIDE ……………………………………………………………………..
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. 14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Before setting up the monitor, ensure that the power to the monitor and other attached devices are turned off. ※ Notice: Stand & Screws are optional A. Connecting the stand A-1. Place the monitor with its front facing downward on a soft cloth. A-2. Assemble the Stand Base into the Stand Body in the correct direction using the included screws in the accessory box. Stand Base Stand Body FS4x10 screws A-3. Once assembled take the monitor up carefully and face the front side. B.
Rear Connection 1 2 3 4 1. DC 12V IN 2. UPGRADE SELECT S/W 3. UPGRADE 1 4. RJ45 5. UPGRADE 2 6. IP RESET 7.
Bottom Key Control 1 2 3 4 5 6 7 8 1. SOURCE/ Selects an input source. Enters a submenu or accepts your selection in the OSD menu.(OSD menu works with HDMI only.) 2. MENU Activates or exits the OSD. Moves previous menu or status in the OSD. 3 & 4. AUTO/▼ & ▲ Moves another option in the OSD. 5 & 6. ◀ VOL ▶ Adjust the volume or menu settings. The first production goods do not have the speaker and stereo out, so this function does not work. 7. /I Turns the power on or off.
OSD Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. (On Screen Display) To adjust the OSD screen: 1. Press the Menu button to enter the OSD menu. 2. Press the ▲/▼ buttons to select the desired option. The selected option is highlighted. 3. Press the ▶ button to enter the submenu for adjusting items. 4. Change the value you wish to adjust by using the ▲/▼ buttons. 5. Press the ◀ button to exit the submenu for adjusting items. 6.
B. OSD Submenu Osd Settings Definition Adjusts the number of horizontal picture elements. Choices are Timer (3sec, 6sec, 12sec), Rotation (0°, 90°, 180°, 270°), Position and Transparancy (range 0-100). Language Adjusts the language of the OSD.
C. OSD Submenu Definition Image Rotation Activates the Image Rotation function. Key Lock 1) Locks all buttons of the monitor. Reset Resets the monitor settings to their factory default. 1) How to unlock On the front key: Press the Left and Down button at the same time over 3 seconds.
Wall mounting (Optional) The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount (not included in the delivery). 100 100 M4x10 screws ※ Attention! You must use four M4x10 screws to assemble this monitor and the wall mount bracket. ※ WARNING! If user use longer than M4x10 it may cause the damage on the unit. Please follow instructed bolt size & length.
Power Consumption Mode Power Consumption Turned On < 25W Turned Off < 1W LED Indicator The power management feature of the monitor is comprised of two stages: Turned on(Blue) and turned off(LED Off). Mode LED Monitor Operation Turned On Blue Normal Operation Turned Off Off Not Operation Accessories 1. Power cord 2. Power adapter 3. Stand base & FS4x10 screws 3EA (Optional) 4. HDMI cable 5. Quick manual 6.
21.5” 21.5˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm): 0.24825(H) x 0.24825(V) Brightness: 250cd/m² (Typical) LCD Type Contrast ratio: 1000:1 (Typical) Viewing angle: 170°/160° (H/V) Response time: 5ms (Typ., on/off) Resolution (H x V) 1920X1080 @60Hz Horizontal: 31~80kHz, Frequency Vertical: 56~60Hz UPGRADE 1-2 UPGRADE SELECT S/W Input Signal RJ45 IP RESET HDMI IN Active Display 476.64mm x 268.11mm Area (H x V) Packing Dimensions 580mm x 440mm x 145mm (W x H x D) (22.83” x 17.32” x 5.
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO
P/N : L39ME0372 Rev.
