21.5-INCH IPM SERIES TFT-LED MONITOR USER MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
………………………………………………………….…… 2~3 …………………………………………………………….......................... 4 ……………………………....................... 5 ………………………………………………………………………….. 6 SAFETY INSTRUCTION CAUTIONS FCC RF INTERFERENCE STATEMENT INSTALLATION CONNECTING WITH EXTERNAL EQUIPMENT …………………………………… 7 ………………………………………………………………… 8 ……………………………………………………….. 9 ~ 12 …………………………………………………….. 13 ~ 17 MOUNTING GUIDE ……………………………………………………………………..
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. 14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Before setting up the monitor, ensure that the power to the monitor and other attached devices are turned off. ※ Notice: Stand & Screws are optional A. Connecting the stand A-1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Base into the Stand Body in the correct direction using the included screws in the accessory box. Stand Base Stand Body FS4x10 screws 3. Once assembled take the monitor up carefully and face the front side. B.
Rear Connection 1 2 3 1. UPGRADE 2. DC 12V IN 3. USB HOST1,2 4. MICRO SD CARD 5. MICRO USB 6. ETHERNET OUT 7.
Remote Controller 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Not operating. 3. ARC (Aspect Ratio Control) Selects a screen ratio. 4. APC (Auto Picture Control) Selects a picture mode. 5. ACC (Auto Color Control) Selects a color mode. 6. AV1 Not operating. 7. AV2 Not operating. 8. PC Not operating. 9. HDMI Not operating. 10. AUTO Android home key. 11. MUTE Not operating. 12. MENU Not operating. 13.
Bottom Key Control 1 2 3 4 5 6 7 8 9 1. SOURCE/ Selects an input source. Enters a submenu or accepts your selection in the OSD menu.( OSD menu works with HDMI only.) 2. MENU Activates or exits the OSD. Moves previous menu or status in the OSD. 3 & 4. AUTO/▼ & ▲ Moves another option in the OSD. 5 & 6. ◀ VOL ▶ Adjust the volume or menu settings. The first production goods do not have the speaker and stereo out, so this function does not work. 7. / I Turns the power on or off.
OSD Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. (On Screen Display) To adjust the OSD screen: 1. Press the Menu button to enter the OSD menu. 2. Press the ▲/▼ buttons to select the desired option. The selected option is highlighted. 3. Press the ▶ button to enter the submenu for adjusting items. 4. Change the value you wish to adjust by using the ▲/▼ buttons. 5. Press the ◀ button to exit the submenu for adjusting items. 6.
B. SETUP Option Function Value Language Sets the language of the OSD menu. OSD Sets the OSD. Key Lock 1) English, German, French, Italian, Spanish, Nederland and Korea See the table on Next page Locks all buttons of the monitor. Off or On Note: Use remote controller to unlock. AV Mode: 16:9, 1:1, 4:3, 14:9, Zoom1, Zoom2, Under PC Mode: 16:9, 4:3 ARC HDMI Input: 16:9, 4:3, JUST SCAN1) Sets the screen ratio. 1) Just Scan: This function is only operated when DTV signal of HDMI is inputted.
C. OSD Option Function Value H POSITION Move OSD horizontally on screen right or left. 0 ~ 100 V POSITION Move OSD vertically on screen up or down. 0 ~ 100 OSD TIMER Adjust OSD displaying time. 5 ~ 60 TRANSPARENT Adjust OSD transparent.
Main Screen 1. IP camera app 2. VMS or Favorites Folder (This folder is not locked) 3. All apps (Password Protected) 4. Background 5. Navigation bar 4 5 1 2 3 Shortcut to the app If you click button, you can add new IP camera. If you long-click button, all controls are locked. If you long-click button, all controls are unlocked.
Enter camera information and click update to add to available camera list. Select the saved IP camera from the available camera list. IP camera’s picture is displayed.
Shortcut to the VMS You can add apps to VMS/Favorites Folder by long-clicking the app within the All Apps area. From the VMS Shortcut menu, click an app to open it. (Long-clicking the app will remove it). *Password The button to access all apps requires a password.
Background If you long-click the background, you can change background image.
Last App Recovery Upon reboot, this feature will automatically resume the last app that was used in the event that power was lost. Ethernet Settings Open “Settings in the “All Apps” section. Click on the Ethernet tab. Enable “Use Ethernet”.
Wall mounting (Optional) The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount (not included in the delivery). 100 100 M4x10 screws ※ Attention! You must use four M4x10 screws to assemble this monitor and the wall mount bracket. ※ WARNING! If user use longer than M4x10 it may cause the damage on the unit. Please follow instructed bolt size & length.
Power Consumption Mode Power Consumption Turned On < 25W Turned Off < 1W LED Indicator The power management feature of the monitor is comprised of two stages: Turned on(Blue) and turned off(LED Off). ▶ Mode LED Monitor Operation Turned On Blue Normal Operation Turned Off Off Not Operation Accessories 1. Power cord 2. Power adapter 4. Stand base & FS4x10 screws 3 EA 5. Remote controller 6. Batteries 7. Quick Manual 8.
21.5” 21.5˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm): 0.24825(H) x 0.24825(V) Brightness: 250cd/m² (Typical) LCD Type Contrast ratio: 1000:1 (Typical) Viewing angle: 170°/160° (H/V) Response time: 5ms (Typ., on/off) Resolution (H x V) 1920X1080@60Hz Horizontal: 31~80kHz, Frequency Vertical: 56~60Hz UPGRADE USB HOST1,2 MICRO SD CARD Input Signal MICRO USB ETHERNET OUT ETHERNET IN Active Display 476.64mm x 268.11mm Area (H x V) Packing Dimensions 580mm x 440mm x 145mm (W x H x D) (22.
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO P/N : L39ME0371 Rev0
