21.5” HD-SDI / 3G Broadcast Monitor 215LEDSN USER GUIDE(v1.0) Driving Visual Innovation Please read this manual carefully to ensure proper use, including connection and operation. Also, keep this manual for future use.
Class B Equipment (Broadcasting and Telecommunications Equipment for Home Use) This equipment is for home use (Class B) and granted a Certificate of Conformity for electromagnetic radiation. It is designed for home use and can be used in all regions. (These images are for illustrative purposes only. They may vary depending on circumstances.) Please read the Safety Instructions carefully to ensure proper use of the product.
Excessive bending of the power plug may cause disconnection or a short circuit. - Please note that disconnection may cause a fire or accident due to a short circuit. Do not remove the power cord while using the monitor. - An electric shock occurring during disconnection may damage the monitor. Installation Instructions If the monitor is to be installed and used in a special place rather than under normal conditions, the surroundings may cause serious quality problems.
To mount a wall-mount monitor on the wall, please consult an expert. - Installation by an unqualified person may cause personal injury. Make sure to use the designated mounting device. Cleaning and Use Instructions Do not spray a cleaning solution directly on the monitor. - Directly spraying on the monitor may significantly increase the risk of discoloration, cracks, or peeling of the LCD panel surface. Do not use or keep flammable sprays or substances near the product.
Do not cover the air vent. - Improper ventilation may cause monitor failure or a fire. If the product is not used for a long time, disconnect the power cord. - Dust buildup may result in an electric shock or short circuit or fire due to heat output, ignition or deteriorating insulation. Do not place the monitor on unstable or vibrating locations, such as shaking shelves or inclined surfaces. - The fall of the product may result in failure or personal injury.
Checking Control Buttons / Names & Functions of I/O Port ……………………...… Checking Control Buttons Names & Functions of I/O Port Menu Tree & Control ………..................................................................................... Menu Tree Menu Control To Get Started……………………...……………………………………………………… Menu Controls and Functions ………….……………..………………..……………..… 2 3 4 5 Picture Settings. Color Settings Audio Settings Marker Settings System Settings Specification …………..…………………………………………..
Checking Control Buttons / Names & Functions of I/O Ports 1. Checking Control Buttons 1. Power 2. Auto 3. Enter 4. Up 5. Down 6. Menu 7. Source 76 5 4 3 2 1 2. Names and Functions of I/O Ports 1 2 3 4 5 6 1. DC 12V In 6. YPbPr 2. SDI A / SDI Out 3. HDMI In 4. DVI 5. VGA 7. Audio In 8. PGM 9.
Menu Tree & Control 1. Menu Tree Main menu includes 1) Picture Settings 2) Color Settings 3) Audio Settings 4) Marker Setting 5) System Settings The picture above shows Picture Settings menus in ViewZ monitor. 2.
To Get Started To get ViewZ monitor started, connect required power and choice of your input signal. Turn on the power button on the front. 1) To choose the input signal after cable connection, please use Source button on front. - Use either up and down keys to move to your input. Then, press enter to select. - Blue arrow shows your choice and when selected the menu turns to blue 2) If there’s no input for your selected source, the window will show No sync/signal.
Menu Controls and Functions 1.
Menu Controls and Functions 2.
Menu Controls and Functions 3.
Menu Controls and Functions 3. Audio Settings (Continued) Sound Channel (SDI) - used to set embedded audio channel for internal speaker or Audio Out - select from CH1, CH2, CH1+CH2, CH3, CH4, CH3+CH4, CH5, CH6, CH5+CH6, CH7, CH8, CH7+CH8, CH9, CH10, CH9+CH10, CH11, CH12, CH11+CH12, CH13, CH14, CH13+CH14, CH15, CH16, and CH15+CH16 - when CH1 is chosen, user can hear Ch1 from both speakers.
Menu Controls and Functions 4. Marker Settings Marker On/Off - used to activate the marker function - Marker should be ON to use any features in Marker Setting menu Line Marker - used to select user’s desired marker type - available in off, 16:9, 4:3, 4:3(on air), 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.
Menu Controls and Functions 5.
Menu Controls and Functions ` 6.
Specification VZ-LEDSN Display 21.5" Screen Size Max Resolution 1920 X 1080 Pixel Pitch 0.08265mm X 0.24795mm Brightness 250cd/㎡(Typical) 1000:1 Contrast Ratio 16:9 Aspect Ratio Viewing Angle (H/V) 170°/160° 16.
Dimensions Outline Dimension 20.25" x 14.56” x 1.77" (W x H x D) (514.5mm x 370mm x 45mm) Net Weight 8.
Memo - 14 -
www.viewzusa.com MODEL VZ-215LEDSN HD-SDI / 3G Broadcast Monitor OPERATION MANUAL © Aug. 2014 by Orion Technology Co., Ltd □ All rights reserved. Reproduction or duplication, without permission of Orion Technology of edition or contents in whole in part, any manner, is prohibited.
