32-INCH IPM SERIES TFT-LED MONITOR INSTRUCTION MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
INSTRUCTION MANUAL ··············· 01 CONTENTS SAFETY INSTRUCTION ....................................................................................... 2~3 CAUTIONS ............................................................................................................ 4 FCC RF INTERFERENCE STATEMENT ............................................................... 5 CONNECTING WITH EXTERNAL EQUIPMENT ................................................... 6 REMOTE FUNCTIONS .......................
02 ··············· INSTRUCTION MANUAL SAFETY INSTRUCTION Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
INSTRUCTION MANUAL ··············· 03 SAFETY INSTRUCTION - The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. - Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “ WARNING - To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.
04 ··············· INSTRUCTION MANUAL CAUTIONS ► CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. CAUTION TO SERVICE PERSONNEL POWER SUPPLY CORD IS USED AS MAIN POWER DISCONNECT DEVICE IN THIS PRODUCT.
INSTRUCTION MANUAL ··············· 05 FCC RF INTERFERENCE STATEMENT NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
06 ··············· INSTRUCTION MANUAL CONNECTING WITH EXTERNAL EQUIPMENT ► Rear Connection 1 1. PGM. 2. MICRO SD CARD. 3. USB1/USB2. 4. MICRO USB. 5. ETHERNET IN. (RJ45) 6.
INSTRUCTION MANUAL ··············· 07 REMOTE FUNCTIONS ► REMOTE CONTROLLER 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. MUTE Mutes the sound. 3. MENU Activates and exits the On Screen Display. 4. EXIT Exits the On Screen Display. 5. VOL(◀ & ▶) Increases or decreases the level of audio volume. (When there is no OSD Menu) Change the set of the OSD Menu. 6. UP/DOWN Moves upwards or downwards in the OSD menu. 7.
08 ··············· INSTRUCTION MANUAL CONTROL AND FUNCTIONS ► Bottom Key Control 1 2 3 4 5 6 7 8 9 1. SOURCE/SELECT (Source function is unavailable) Enters a submenu or accepts your selection in the OSD menu. 2. MENU/EXIT Activates and exits the On Screen Display. This button can also be used to move previous menu or status. 3. ▼ Move downwards in the OSD Menu. 4. ▲ Move upwards in the OSD Menu. 5. ◀ Change the set of the OSD Menu. Decreases the level of audio volume.
INSTRUCTION MANUAL ··············· 09 CONTROL AND FUNCTIONS ► Lock function (Key Lock) 1. Lock : Without OSD menu pop up on the screen. Press down(▼), down(▼), up(▲), up(▲) 2. Unlock : When activating Lock function, press the down(▼), down(▼), up(▲), up(▲) in order. ► Lock function (Remote Control) 1. Lock : Press the 7,8,9,0 button on the remote controller in order. 2. Unlock : When activating Lock function, press the 7,8,9,0 button on the remote controller in order.
10 ··············· INSTRUCTION MANUAL CONTROL AND FUNCTIONS ► OSD MENU DESCRIPTION All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. (On Screen Display) To adjust the OSD screen: 1. Press the Menu Key or Menu Button to enter the OSD Menu. 2. To move from the menu, you may press the Up/Down Key on the Side or Use the Up/Down button on the Remote Control. 3. To enter the menu, press the Enter Key or the Enter Button. 4.
INSTRUCTION MANUAL ··············· 11 CONTROL AND FUNCTIONS ► Color Settings Menu Description ■ Color Temp - used to control color temperature. - users can choose Cool, Normal, Warm, User - in User mode, users can define RGB Gain values for own purpose. ■ Gain Red/Green/Blue - changes only in User mode. - used to set R/G/B Gain level from 0 to 100.
12 ··············· INSTRUCTION MANUAL CONTROL AND FUNCTIONS ► Audio Settings Menu Description ■ Volume - used to control volume level of the internal speaker from 0 to 100. ■ Mute - used to turn off entire audio volume. - to turn back on the audio volume to previous level select Off.
INSTRUCTION MANUAL ··············· 13 CONTROL AND FUNCTIONS ► System Settings Menu Description ■ OSD Language - Sets the language of the OSD menu. (English, German, Spanish, French, Italian, Dutch, Polish, Portuguese, Russian, Turkish) ■ OSD Timeout - Adjust OSD displaying time. (Off, 10, 20, 30, 40, 50, 60) ■ Backlight - to control backlight of screen from 0 to 100. ■ Reset - used to reset the monitor to factory default setting.
14 ··············· INSTRUCTION MANUAL LAUNCHER PROGRAM GUIDE ► Main Screen ④ ① ② ③ 1. ONVIF Viewer : Shortcut of IP camera Viewer. 2. VMS or Favorites Folder. 3. Application : You can see the whole APP. 4. Background.
INSTRUCTION MANUAL ··············· 15 LAUNCHER PROGRAM GUIDE ► Shortcut to the VMS You can add apps to VMS/Favorites Folder by long-clicking the app within the All Apps area. From the VMS Shortcut menu, click an app to open it. (Long-clicking the app will remove it). ► Background If you click the background more than 1 second, You can change the background to other background. ► Password The button to access all apps requires a password.
16 ··············· INSTRUCTION MANUAL LAUNCHER PROGRAM GUIDE ► Navigation bar Hide Volume Down Back Home Multi Menu ► Ethernet Settings Open “Settings in the “All Apps” section. Click on the Ethernet tab. Enable “Ethernet”. A static IP Address can also be added in this section. • “DHCP” is the default setting.
INSTRUCTION MANUAL ··············· 17 MOUNTING GUIDE Wall mounting (Optional) The LCD monitors are suitable for VESA standard wall mount (not included in the delivery). Screws 1. 32-inch: VESA 200mm x 200mm ※ Attention! You must use four M6x8 screws to assemble this monitor and the wall mount bracket. ※ WARNING! If user use longer than M6x8 it may cause the damage on the unit. Please follow instructed bolt size & length.
18 ··············· INSTRUCTION MANUAL POWER MANAGEMENT Power Consumption Mode Power Consumption Turned On < 55W Turned Off < 1W LED Indicator The power management feature of the monitor is comprised of two stages: Turned on(Green) and turned off (Red).
INSTRUCTION MANUAL ··············· 19 SPECIFICATIONS 1. Monitor Specification 32” 32” Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm): 0.36375(H) x 0.36375(W) Brightness: 400cd/m² (Typical) LCD Type Contrast ratio: 3000:1 (Typical) Viewing angle: 178°/178° (H/V) Response time: 6.5ms (Typ., on/off) Resolution (H x V) 1920X1080@60Hz Horizontal: 31~80kHz, Frequency Vertical: 50~75Hz PGM recommends sandisk usb flash driver. (usb 2.
20 ··············· INSTRUCTION MANUAL TROUBLE SHOOTING GUIDE WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
P/N : L39ME0431 Rev.
