User Manual

14 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Volume
How to use OSD
Select Input Source
Press the + / – buttons to adjust volume on monitor and remote controller
Press 'SOURCE' buon on monitor or on remote controller.
Press ▲ / ▼ buon to change input source and then press OK buon to select input source on monitor.
Press ▲ / ▼ buon to change input source and then press MENU buon to select input source on remote
controller.
If you connect any input source, monitor will display current input source resoluon and frequency.
Press MENU button on monitor or remote controller, to enter or exit main menu.
Press MENU button to return to the previous MENU.
Press the ◄ / ► buttons on remote controller or + / – buttons on monitor, to select a sub-menu such as PICTURE,
SOUND, SETUP & PC.
Press the ▲ / ▼ buttons on remote controller / monitor to enter the selected sub-menu.
Press the ▲ / ▼ buttons on remote controller / monitor to select an item which need to be adjusted.
Press the ◄ / ► buttons on remote controller or + / – buttons on monitor, to change or set the value of selected
one.
In operation, the unavailable function / value will be shown in gray.
This manual describes the operation of composite signal (Video 1) as an example. But PC (VGA) sub-menu is only
available in VGA input.