User Manual

11User Manual Visit the ViewZ USA website at https://www.viewzusa.com
DAISY CHAIN CONFIGURATION
Video Wall Wiring Configurations - Daisy Chain
If user wants to use external HDMI input source to be displayed on mulple units, the connecon diagram of the video wall is
as shown in the following gure (*Note - HDMI is the only source that daisy-chaining supports
If you have mulple HDMI input sources, use a matrix to switch sources. The connecon diagram between the video wall and the
matrix is as shown below (other signal input is an opon in this case)
Regarding the system connecon, the output channel of the matrix should correspond to the video wall screen one by one. It
means the output channel of the matrix should correspond to the screen q, and the output channel of the matrix should
correspond to the screen w, according to this wiring, as shown above as shown, the upper le corner is the screen q, the
upper right corner is the screen w, the lower le corner is the screen e, and the lower right corner is the screen r.
Cat 5 Cable
IR Receiver
IR Receiver
Cat 5 Cable
HDMI Distributor
HDMI Cable
HDMI Cable
q
q
e
e
w
w
r
r