User Manual

15User Manual Visit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Image
Wall H Addr
So ID
Wall V End
4)
Wall V Addr
Wall H End
3)
Single Display
The horizontal starting number of video wall monitors
Monitor's physical location
1)
The vertical location value of video wall monitors
The vertical starting number of video wall monitors
The horizontal location value of video wall monitors
Switch selected/entire monitors as one of video wall system
Switch selected/entire monitors as only one display monitor
1
2)
H_Addr: 1 ~ 15, V_Addr: 1 ~ 15
1 ~ 15
1
2)
1 ~ 15
Video Wall Set
FUNCTION VALUE
1) 'H_Addr:1 & V_Addr:1' is the le-top monitor. This physical address is controlled by manual selecon.
2) You can change the vaule of 'Wall H_Addr & Wall V_Addr' between 1 and 15. But the only available value is '1.'
3) You should select the horizontal locaon value between 1 and 15. The value '1' is assigned to the le-top corner monitor.
4) You should select the vercal locaon value between 1 and 15. The value '1' is assigned to the le-top corner monitor.
► To apply each monitor as one of the video wall system monitors, you should click 'Video Wall Set' aer the setup of 'Wall H/V End'
► To apply all of video wall system monitors, you should apply 1) ~ 4) process to each monitor
▲/▼ MOVE ◄/►ADJUST
ENTER SELECT MENU RETURN