User Manual

Table Of Contents

16 User ManualVisit the ViewZ USA website at https://www.viewzusa.com

CONTROL AND FUNCTION

Image - Video Wall Setup for HDCP

IR Control

Generate ID

So ID

Close OSD

Idener

Sees the horizontal and vertical address of selected monitor

Creates the logical identification code (Identifier)

The Physical location address of video wall system monitors

Close ID OSD window

The logical identification code created by 'Generate ID'

Variable

H_Addr:1 ~ 15, V_Addr:1 ~ 15

Variable

FUNCTION VALUE

1) Press the 'ID (0)' buon on the remote controller

2) On the ID OSD window, select 'Generate ID' and click it to create the own logical idencaon code ('Idener' on the le-boom)

3) Based on the 'Idener Code (Idener)', type the code into the "Idener 1 & Idener 2"

On the above picture, '238' is the Idener 1 and '54' is the Idener 2.

4) If this monitor is located at 2nd row & 3rd column (for ex. 3x3 videowall), type '2' on H_Addr and '3' on V_Addr

5) Click 'Applicaon' to be applied typed values. Then, click 'Close OSD'

► Aer this process, if you open the 'ID' OSD window, it will show default value. But, the values (for HDCP input) is already set it up

▲/▼ MOVE ◄/►ADJUST

ENTER SELECT MENU RETURN