User Manual

ViewZ 5.6" HD-SDI CCTV TEST MONITOR
Signal Selection Menu
Operation method: Press the “SOURCE” key,
and the signal channel selection interface will
appear on the screen as shown in the figure on
the left. Press the “SOURCE” key again, and the
yellow cursor will move down to the next signal
channel; stay on this channel for about 1 second,
and the screen will display the signal channel
where this cursor stays.
AV1 indicates the input channel of video signals 1.
AV2 indicates the input channel of video signals 2.
P/G indicates the channel of color bar signals of
the product itself.
PC-RGB indicates the input channel of PC signals.
HDMI indicates the input channel of high
definition DVD signals.
SDI indicates the input channel of high definition
SDI camera signals.
Main Menu (Picture)
Operation method: Press the “MENU” key,
and the main menu interface will appear on the
screen as shown in the figure on the left. Press
the “SOURCE” key and “P/G” key
to select
submenus leftwards and rightwards; press the
“VSM” key to select submenus downwards in a
cyclic way; press the “MENU” key again to confirm
the current selected submenu. Press the “ESC”
key to go back level by level and exit the menu.
Picture Mode: Four modes are optional, namely,
“Standard”, “Dynamic”, “User”, and “Soft”.
C
olor temperature: Four modes are optional,
namely, “Standard”, “Cold”, “User”, and
“Warm”.
Aspect Ratio: Three modes are optional,
namely, “Auto”, “16:9”, and “4:3”.
Noise Reduction: Four modes are optional,
namely, “High”, “Middle”, “Low”
, and
“Off”.
Screen: The option for adjustment of the position
of display screen in the PC mode.
This interface may be slightly different from
the real one, depending on the product
This interface may be slightly different from
the real one due to product upgrading.
9
Screen Display