User Manual

ViewZ 5.6" HD-SDI CCTV TEST MONITOR
Main Menu (Settings)
Operation method: Press the “MENU” key,
and the main menu interface will appear on the
screen as shown in the figure on the left. Press the
“SOURCE” key and “P/G” key to select submenus
leftwards and rightwards; press the “VSM” key to
select submenus downwards in a cyclic way; press
the “MENU” key again to confirm the current
selected submenu. Press the “ESC” key to go back
level by level and exit the menu.
OSD Language: Multiple languages are optional
such as “Chinese” and “English”.
Restore Factory Default: Restore all adjusted
parameters to factory default.
No Signal Screen: Color setting of screen display
when the current channel has no signal input.
Two colors are optional, namely, “Blue” and
“Black”.
Energy Saving: The screen can enter sleep mode
automatically when the current channel has
no signal input; this function can be disabled
or enabled here.
Rotary Switch: Select to turn on or off the
brightness, contrast and saturation adjusting
knobs.
Lobat Display: When the battery icon has only one
bar left, the prompt of low battery will
appear on the screen; this function can be
disabled or enabled here.
This interface may be slightly different from
the real one due to product upgrading.
10
Screen Display