User Manual

ViewZ 5.6" HD-SDI CCTV TEST MONITOR
Product Operation
Step 1: As shown in Fig. 1, put four
Ni-MH cells in the battery compartment
of the product in sequence according to
the anode and cathode marks. (Please
pay attention to the anode and cathode
of each battery; installation with
reversed node and cathode may result in
electrical failures and damage the
Step 2: Turn the power switch “ON”, the
LED indicator stays on in green and the
device is working properly.
Step 3: According to the current signal
access mode, press “SOURCE” on the right
side of panel to select the corresponding
signal channel.
Step 4: Use the keys on the front panel
and the knobs on the right side to adjust
the picture
display effects to meet
individual needs.
6