Installation manual

65
2. Attach the Display to the VESA Plate
3. Adjustment
Tighten the adjustment screw by using an Allen Key provided to fix the tilting angle.
Maintenance
• Check that the bracket is secure and safe to use at regular intervals(at least every three months).
• Please contact your dealer if you have any questions.
Tighten all screws but do not over tighten.
Adjust to the desired location or tilt.
Tension is pre-set at the factory. If too tight or too
loose, you may adjust the tension by loosening or
tightening the head and arm adjustment bolts.
Lift the display and match the holes on your display with the holes on the mount. Secure your display to
the mount by tightening screws.
B
M-A/M-B
M-C
B
180° 180° 180°
+70°
-70°