Manual

21
NOTE: Read the entire instruction manual before you start installation and assembly.
Component Checklist
WARNING
• Do not begin the installation until you have read and understood all the instructions
and warnings contained in this installation sheet. If you have any questions
regarding any of the instructions or warnings, please contact your local distributor.
• This mounting bracket was designed to be installed and utilised ONLY as
specified in this manual. Improper installation of this product may cause damage
or serious injury.
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage
to the items, This greatly reduces their holding power.
• This product is intended for indoor use only. Using this product outdoors could
lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, telephone your local distributor for a replacement.
1. Attaching the Adapter Plate to the Mounted Head
B
C
200mm
100mm
100mm
200mm
75mm 50mm
75mm
50mm
Package M
D8 washer (x4)
M-C
small spacer (x8)
M-D
M6x14 (x4)
M-A
M8x20 (x4)
M-B
Attach the adapter plate to the mounted head using appropriate screws and nuts so that the hole pattern can
be expanded to Max VESA 200x200.
M5 nut (x4)
C
adapter plate (x1)
A
M5x16 (x4)
B
The adapter plate is only compatible with VESA 50x50/75x75/100x100 mounted head.
A