Installation Manual
3Installation Instructions Visit the ViewZ USA website at http://www.viewzusa.com
q
q
q
w
w
w
e
e
r
CM series
This bracket is designed to mount a monitor from the ceiling structure. It can be used with the exisng truss structure of the building
or in conjuncon with a channel strut. There are four lengths of brackets available.
The following tools may be required depending on your installaon.
• Part #
• Part #
• Part #
• Part #
CM06B
CM06W
CM18B
CM18W
Length of 3' to 6'
Length of 3' to 6'
Length of 6' to 18'
Length of 6' to 18'
Your ViewZ mount product is shipped with all proper installaon hardware and components. If there are parts missing
and/or damaged, please stop the installaon and contact ViewZ USA at (888)-998-4399.
Electronic Stud Finder
3/4" wrench
q 1/2”-13 x L15
Lock-Nut (1 pc.)
w φ 50 x φ 13.5 x T3.1
Washer(1 pc.)
q M4 x 0.7 x L 45 screw (1 pc.)
w M4 x 0.7 x L 4.9
Lock-Nut(1 pc.)
e φ 12 x φ 4.3 x T0.8
Washer(2 pcs.)
q 1/4W20 x L50.7
Screw (1 pc.)
w φ 12 x φ 6.6 x T1
Washer(2 pcs.)
e φ 12.2 x φ 6.6 x T2
Washer(1 pc.)
r 1/4W20 x L7.7
Lock-Nut(1 pc.)
q Bracket (1 pc.)
Pole Mount Assembly
6 (1pc.) / 18 (1pc.)
Protecve Eye-wear
Level
Pencil
5/16" wrench
7/16" wrench
Phillips Screwdriver
7 mm wrench 10 mm wrench
Assembly Components
Installation Tools
Telescopic Monitor ceiling mount Info