Installation Manual

Component Checklist
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, telephone your local distributor for a replacement.
ceiling plate (x1)
A
1.For Solid Brick and Concrete Mounting (fit flat roof or pitched roof)
Drill six pilot
holes
2
60mm
(2.4")
60mm
2.4"( )
45mm
(1.8")
ø 12mm
(ø 1/2")
Screw ceiling
plate on the
ceiling
1
Mark the exact
location of
mounting holes
Installers must verify that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
WARNING
M8 (x6)x70 iron expansion bolt
W-A
Package W
W-A
1-1/2" internal diameter
or
W-A
2.Installing the Pole
set screw(x1)
B
Allen key (x1)
C
Thread and tighten the pole
(not included) onto the ceiling
plate.
Insert and tighten one set
screw to secure it.
B
C