User Manual

Table Of Contents

42 User ManualVisit the ViewZ USA website at https://www.viewzusa.com

Network Input Source

C0NTROL OPERATION

6.2. Network Input Source - Display Setup

• To setup the display of IP signal, you need to setup an IP address in 'Encoder Set' window. The decoder IP

address seng method is as follows:

1. On the MAIN NAVIGATION, go Maintenance/Encoder buon to pop up the encoder seng window

2. Type the IP/Gateway/Subnet Mask & DNS based on your network preference.

3. Type the Name as you prefer and choose the Display Type / Group (layout)

4. Display Type has opons - Synchronous Echo, Cloud Screen, Signal Preview and Disable. Please select

Synchronous Echo mode and then click OK to save & exit.

• On the MAIN NAVIGATION, go Main Funcon/Screen Group and click to check Show image.

• Double-click to open the newtwork input source, then the image/video will be synchronized with the SCREEN

LAYOUT input-windows. (see the gure below)