User Manual
Table Of Contents
44 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
Network Input Source
C0NTROL OPERATION
6.3.1. Network Input Source - Add Camera
• Automac discovery
1. On QUICK MENU/Net Video Source, click the Auto Discovery (magnier icon) buon at the top area.
2. The Input Username & Password window will pop up and type those to add cameras.
3. The desired IP cameras shoule be located on the same network segment and the ONVIF protocol should be
already turned on.
4. Then, the cameras will be automacally listed under No Group (the soware's default)
• If you want to move the auto-discovered cameras to dierent groups, select the desired camera (on the list) and
right-click to select Move to Group to choose the corresponding group
• The name of the auto-discovered camera will be shown as IP address of the camera. If you want to change the
camera name, right-click the camera and select Edit. The Add IP Camera window will pop up and then change
the Name, then click Add to nish eding.