User Manual
Table Of Contents
45User Manual Visit the ViewZ USA website at https://www.viewzusa.com
Network Input Source
C0NTROL OPERATION
6.3.1. Network Input Source - Add Camera
• Manual Add
If the Automac discovery process cannot nd the desired camera or you want to add the RTSP streaming
forwarded by the NVR, DVR, or streaming server, you shuold manually add the camera or RTSP streaming. The
steps are as follows;
1. On QUICK MENU/Net Video Source, click Add Camera ('+' icon on top) buon to open the Add IP Camera
window
2. Select the Group, enter the Camera name (the default is IP address), and choose the Transport Mode (RTP /
UDP; RTP over RTSP (TCP)
3. Type the Main/Sub Media Stream URL/Width/Height - Most of camera manufacturer has their own address &
size. If you do not know about this, please contact camera manufacturers.
4. Select the Authencaon Method & type the Username and Password - if the camera has the username &
password to access it. If the camera does not have the account password, select Anonymous Access mode.
5. Click Save buon to add the IP camera to the list of Network Video Source and then click Close to exit.
6. If you need to add mulple cameras, just change the Name & Informaon and click the Save buon before
closing.
• The camera should be based on the standard Onvif protocol
Caution