User Manual

53User Manual Visit the ViewZ USA website at https://www.viewzusa.com
Maintenance
C0NTROL OPERATION
6.6.1. Maintenance - Screen Set & Backdisplay Screen
1. On the Screen Set window of MAIN NAVIGATION/Maintenance, click enable Screen Group and set the physical
screens and logical screens.
ex. If you have total 4 monitors (2x2), you decide to use 3 monitors (as the Main Group screens) and 1 monitor
(as a Backdisplay Screen). Then, you need to type Physical Screens Row - 3 & Col - 1 and Logical Screens Row - 1
& Col - 1.
2. Aer input Physical & Logical Screens number, click the Port-set buon (on the top-right corner)
3. On the Screen Port Set window, select Main Screen on the top-right corner selecon window.
4. Drag & drop the le output port (labeled as Main Screen) to the right window - each secon means a single
monitor.
5. Select Display Back Screen on the top-right corner selecon window.
6. Drag & drop the le output port (labeled as Display Back Screen) to the right window.
7. Click OK to complete the setup.
03 : Port 0
03 : Port 1
03 : Port 3
03 : Port 2